RB20DET vs. SR20DET - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nguyen · 10-23-2001, 08:27 PM

rubersidedown if you want to drop in a motor that would run 12's in your s13, I suggest you get a v10 from a viper or a corvett motor, because a car that weighs close to 2900 bl with a 2.0l at 7 pound of boost that runs 14.2 is not slow. If I put slicks on I will run high 13s. my car has 3 amps in the trunk, 2 10"Focal subs in the rear quarter panels with ac. so to me the SR20det swap was worth every pennies that I spent on it....by the way a KA with basic bolt ons should run low 16s if not high 15s

10-23-2001, 08:27 PM	#1
nguyen Leaky Injector Join Date: Jul 2001 Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	rubersidedown if you want to drop in a motor that would run 12's in your s13, I suggest you get a v10 from a viper or a corvett motor, because a car that weighs close to 2900 bl with a 2.0l at 7 pound of boost that runs 14.2 is not slow. If I put slicks on I will run high 13s. my car has 3 amps in the trunk, 2 10"Focal subs in the rear quarter panels with ac. so to me the SR20det swap was worth every pennies that I spent on it....by the way a KA with basic bolt ons should run low 16s if not high 15s