S13 17x10+35 rear will it fit??

[2.240s]

I searched , rollin a 17x9+35 +10mm spacer rolled fenders, wanting to go with a 17x10 but dont want it sticking out the wheell wells,will +35 17x10 clear coils and would i have to pull fenders.????

[jrocslider]

didnt search long and hard enough

yes it will fit. with flying colors

http://www.zilvia.net/f/showthread.p...+whore+fitment
wheel fitment whore thread

[2.240s]

Originally Posted by jrocslider

didnt search long and hard enough

yes it will fit. with flying colors

17x10+35 ?? yeah i searched ,aint jack came up.

[yokotas13]

there is an entire fitment thread
no you didnt search

[Kaotik25]

in before the woot woot!

[2.240s]

Originally Posted by yokotas13

there is an entire fitment thread
no you didnt search

Call me a horses a$$ but 20 min later and i still have not found anything or pic of a S13 sittin on rear 17x10+35.

[DOOK]

as said before, yeah it'll fit, I'm sure somewhere in the 8 billion pages of the picture whore wheel fitment thread you'd find it. You can do the math yourself though, 25mm=.9084 inches

[jrocslider]

Originally Posted by mr_240sx

gonna use the beautiful car of mr_240sx as a reference. these are just the pics. but i think his wheels are a x10+35 correct me if i'm wrong. i tried searching but i'm busy with sumthing else right now. you can go off this new info. hope this helps.

mr_240sx if its not cool with you using ur car as a reference lmk and i'll take it down. thanks and lmk if i'm right on the wheels sizes or not

[2.240s]

Originally Posted by jrocslider

gonna use the beautiful car of mr_240sx as a reference. these are just the pics. but i think his wheels are a x10+35 correct me if i'm wrong. i tried searching but i'm busy with sumthing else right now. you can go off this new info. hope this helps.

mr_240sx if its not cool with you using ur car as a reference lmk and i'll take it down. thanks and lmk if i'm right on the wheels sizes or not

Thanks for looking out, I saw that pic but i did not see text 17x10+35,I think your right looks like it to me.
And by the way i failed math.
I have changed my mind i am going with 13x7+-1 all the way around

[fliprayzin240sx]

Originally Posted by 2.240s

Thanks for looking out, I saw that pic but i did not see text 17x10+35,I think your right looks like it to me.
And by the way i failed math.
I have changed my mind i am going with 13x7+-1 all the way around

13??? Whats that, your brake rotors?

[jrocslider]

i think that was a facetious comment

haha at least i hope so cause c'mon... daytons on a 240. seen it before in the pic thread and no thank you. daytons should be banned from earth