Opinions Needed( Dyno Test Pics ) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

72nismo · 09-04-2007, 03:25 PM

The reason it is like that is.....according to JWT, when you setup your MAF, you need approx. 18" between MAF and turbo (assuming the pipe is straight.) In order to shorten this distance, you can add a bend to the pipe as I believe everyone already knows. Now, if you notice in the 510 there is not much room and if you put a 90 bend in the tube then your MAF will be inside the shock tower so you must bring the pipe back around with second 90 bend in order to bolt on the MAF.

09-04-2007, 03:25 PM	#1
72nismo Zilvia Junkie Join Date: Oct 2006 Location: So Cal Posts: 496 Trader Rating: (7) Feedback Score: 7 reviews	The reason it is like that is.....according to JWT, when you setup your MAF, you need approx. 18" between MAF and turbo (assuming the pipe is straight.) In order to shorten this distance, you can add a bend to the pipe as I believe everyone already knows. Now, if you notice in the 510 there is not much room and if you put a 90 bend in the tube then your MAF will be inside the shock tower so you must bring the pipe back around with second 90 bend in order to bolt on the MAF.