This is what you do bro. Get down on your knees, and look at your clutch pedal. On the top of the pedal there will be a plastic plug, with 2 wires coming out. All you need to do to bypass the clutch is cut them off, and splice them together. That was your car thinks that the clutch is alway in. That could lead to problems. What I would do is go out, and get a relay that will connect the wires together, and hook that up to our remote start. It is not a very hard job, just a little tricky. If you want, I can write up a though procedure to doing this, but it will depend on the type of remote start you're using.
-Dmitriy
|