Need help: Gas Smell - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hinds90 · 09-23-2007, 01:03 PM

Quote:

Originally Posted by downshift180

wtf dual cams have that shit hanging on top????

So this motor came out of a s13. As far as the gas smell when I have the windows down it's really strong but when I have the windows up and a/c on you really can't smell gas it's still there but not as bad. Also I took the metal fuel pump cover off and took a sniff around the fuel pump and it didn't seem to strong around that area. Hope that narrows it down.

hinds90 · 09-23-2007, 02:46 PM

Could someone tell me what those sensors are and were they go.

For the guys who's fuel pump o-ring needed to be replaced when you got close to was the smell strong. It comes from that area but when I get really close it's not that strong. Maybe it only smells strong when you drive.

Dream240 · 09-24-2007, 08:44 AM

Sorry here's the link again.

http://www.240edge.com/manuals/usdm-cars.html

It was 240edge.com not 240sxedge.com. Sorry my bad.

As far as the vaccuum lines disconnected, It looks like he disconnected the EVAP canister purge control solenoid lines.

The one on the right goes into the EVAP canister purge control valve. I'm not sure where the other one goes.

The diagram is in the FSM, EC section, page 13. On page 12 you can follow the routing from the control solenoid to find out where the other line goes. I'm thinking it goes back to the purge canister but I'm not sure.

GL

hinds90 · 09-24-2007, 02:13 PM

What about the connector to the right in that picture,do you have any idea where it goes. Thanks for the help I would have been lost without it since this is my first nissan.

As far as the gas smell its coming from the fuel pump area but im not positive its the o-ring seal it was replaced in June. Do you guys think it could have been installed wrong.

Dream240 · 09-25-2007, 07:50 AM

I honestly can't tell where that connector goes. Just look around for an open connector and see if it fits! I really dont remember there being a connector running along the injector wires like that.

hmmmm......fishy

hinds90 · 09-25-2007, 06:51 PM

Question where is the egr and canister control valve located at on a 95 2

40sx.

09-23-2007, 02:46 PM	#2
hinds90 Leaky Injector Join Date: Apr 2005 Location: MS Age: 39 Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	Could someone tell me what those sensors are and were they go. For the guys who's fuel pump o-ring needed to be replaced when you got close to was the smell strong. It comes from that area but when I get really close it's not that strong. Maybe it only smells strong when you drive. Last edited by hinds90; 09-24-2007 at 02:10 PM..

09-24-2007, 08:44 AM	#3
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Sorry here's the link again. http://www.240edge.com/manuals/usdm-cars.html It was 240edge.com not 240sxedge.com. Sorry my bad. As far as the vaccuum lines disconnected, It looks like he disconnected the EVAP canister purge control solenoid lines. The one on the right goes into the EVAP canister purge control valve. I'm not sure where the other one goes. The diagram is in the FSM, EC section, page 13. On page 12 you can follow the routing from the control solenoid to find out where the other line goes. I'm thinking it goes back to the purge canister but I'm not sure. GL __________________ Don't mess with my monkey...he's loaded.

09-25-2007, 07:50 AM	#5
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	I honestly can't tell where that connector goes. Just look around for an open connector and see if it fits! I really dont remember there being a connector running along the injector wires like that. hmmmm......fishy __________________ Don't mess with my monkey...he's loaded.

09-24-2007, 02:13 PM	#4
hinds90 Leaky Injector Join Date: Apr 2005 Location: MS Age: 39 Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	What about the connector to the right in that picture,do you have any idea where it goes. Thanks for the help I would have been lost without it since this is my first nissan. As far as the gas smell its coming from the fuel pump area but im not positive its the o-ring seal it was replaced in June. Do you guys think it could have been installed wrong.

09-25-2007, 06:51 PM	#6
hinds90 Leaky Injector Join Date: Apr 2005 Location: MS Age: 39 Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	Question where is the egr and canister control valve located at on a 95 2 40sx.