Both my s13s are screwed - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DDSR240 · 10-07-2007, 06:59 PM

As 4 my ka no power to fuel pump or starter but both work and I keep getting an ecu code flash 1...2...3...4..5 and it just keeps repeating.

And if any body knows what sends the fire signal to the coil packs on a sr20det please let me know im only getting spark to one cylinder.

DDSR240 · 10-07-2007, 11:02 PM

any body home

s13silvia123 · 10-07-2007, 11:04 PM

coil packs------igniter

RedtopTech · 10-08-2007, 12:00 AM

No power to starter or fuel pump indicates problem in the ignition switch circuit

SDS13COUPE · 10-08-2007, 08:04 AM

Check your fuses

boycelaforest707 · 10-08-2007, 08:16 AM

Quote:

Originally Posted by DDSR240

As 4 my ka no power to fuel pump or starter but both work and I keep getting an ecu code flash 1...2...3...4..5 and it just keeps repeating.

And if any body knows what sends the fire signal to the coil packs on a sr20det please let me know im only getting spark to one cylinder.

code 1-2-3-4-5 means your not in diagnostic mode, it is asking you to change modes. This is a SOHC right?
Spark on SR20 sent by ECU to IGNITOR CHIP to COIL PACK

DDSR240 · 10-08-2007, 08:40 AM

can I use a q45 igniter chip with aem standalonea BASE MAP?

240sx_LE · 10-08-2007, 09:16 AM

Quote:

Originally Posted by DDSR240

As 4 my ka no power to fuel pump or starter but both work and I keep getting an ecu code flash 1...2...3...4..5 and it just keeps repeating.

And if any body knows what sends the fire signal to the coil packs on a sr20det please let me know im only getting spark to one cylinder.

you and me both buddy... are screwed. well, atleast you still have a possibly running motor anyway.

SDS13COUPE · 10-08-2007, 10:52 AM

I'm running a Q45 ignitor chip. All you need is the connectors with the harness so you can wire it up. I'm not sure about the aem base map.

DDSR240 · 10-08-2007, 03:28 PM

finnaly got it running but the auto trans will not go in to the final gear it revs at like 4000 doing 65 wtf is going on.

brokeAs240sx · 10-08-2007, 03:30 PM

Quote:

Originally Posted by DDSR240

finnaly got it running but the auto trans will not go in to the final gear it revs at like 4000 doing 65 wtf is going on.

Sounds like overdrive is off... either the button is not pressed, or your auto tranny control unit is bad (or the wiring somewhere in that circuit is bad).

10-07-2007, 06:59 PM	#1
DDSR240 Zilvia Member Join Date: Dec 2006 Location: South Carolina Age: 38 Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	Both my s13s are screwed As 4 my ka no power to fuel pump or starter but both work and I keep getting an ecu code flash 1...2...3...4..5 and it just keeps repeating. And if any body knows what sends the fire signal to the coil packs on a sr20det please let me know im only getting spark to one cylinder. __________________

10-07-2007, 11:02 PM	#2
DDSR240 Zilvia Member Join Date: Dec 2006 Location: South Carolina Age: 38 Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	any body home __________________

10-07-2007, 11:04 PM	#3
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 43 Posts: 3,267 Trader Rating: (16) Feedback Score: 16 reviews	coil packs------igniter __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

10-08-2007, 08:40 AM	#7
DDSR240 Zilvia Member Join Date: Dec 2006 Location: South Carolina Age: 38 Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	can I use a q45 igniter chip with aem standalonea BASE MAP? __________________ Last edited by DDSR240; 10-08-2007 at 08:50 AM.. Reason: TYPO

10-08-2007, 03:28 PM	#10
DDSR240 Zilvia Member Join Date: Dec 2006 Location: South Carolina Age: 38 Posts: 259 Trader Rating: (0) Feedback Score: 0 reviews	finnaly got it running but the auto trans will not go in to the final gear it revs at like 4000 doing 65 wtf is going on. __________________

10-08-2007, 12:00 AM	#4
RedtopTech Zilvia Member Join Date: Dec 2005 Location: Virginia Beach, VA Age: 40 Posts: 293 Trader Rating: (0) Feedback Score: 0 reviews	No power to starter or fuel pump indicates problem in the ignition switch circuit

10-08-2007, 08:04 AM	#5
SDS13COUPE Zilvia FREAK! Join Date: May 2006 Location: San Diego Age: 39 Posts: 1,403 Trader Rating: (19) Feedback Score: 19 reviews	Check your fuses

10-08-2007, 10:52 AM	#9
SDS13COUPE Zilvia FREAK! Join Date: May 2006 Location: San Diego Age: 39 Posts: 1,403 Trader Rating: (19) Feedback Score: 19 reviews	I'm running a Q45 ignitor chip. All you need is the connectors with the harness so you can wire it up. I'm not sure about the aem base map.