KA24DE hesitation problems - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

unicoladron · 11-21-2007, 10:00 AM

Quote:

Originally Posted by DALAZ_68

woah woah woah....the engine pulled 300hp...then its gotta be ur ECU...

if the engine is from a 97 OBDII car...and ur running the OBI harness...then uve lost the mapped out/tuned ECU for it cuz ur using a DOHC s13 harness and ECU right...?

also might wanna check the injectors again...they might not be the OEM ones

he only mentioned he's using the motor from the 97, it seems like he's using the harness and ecu from his 91. but there is no evidence supporting this?

which harness and ecu are you using?!

Boostin240sx · 11-21-2007, 10:09 AM

I'm using the 91' harness and ECU.

How would gas get in the oil if an injector seal was bad assuming all the other seals were good. If by chance it was squirting that much gas into the intake runner to blow by another seal then I imagine it would be running pig rich, smoke like crazy and not to mention smell it in the exhaust.

*DALAZ_68* · 11-21-2007, 10:17 AM

Quote:

Originally Posted by unicoladron

he only mentioned he's using the motor from the 97, it seems like he's using the harness and ecu from his 91. but there is no evidence supporting this?

which harness and ecu are you using?!

thats why im asking what u just asked lol

cuz if thats the case its obvious what the situation is

11-21-2007, 10:09 AM	#2
Boostin240sx Leaky Injector Join Date: Jan 2006 Location: VA - 757 Posts: 134 Trader Rating: (2) Feedback Score: 2 reviews	I'm using the 91' harness and ECU. How would gas get in the oil if an injector seal was bad assuming all the other seals were good. If by chance it was squirting that much gas into the intake runner to blow by another seal then I imagine it would be running pig rich, smoke like crazy and not to mention smell it in the exhaust.