S13 project.....body and rust repair - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jung918 · 11-23-2007, 10:24 AM

What make is your welder and which setting did you use?
There should be a guide on your welder somewhere telling you which setting you should use depending on metal thickness and if you are using fluxcore wire or soild wire.

240sxrb25 · 12-09-2007, 07:02 PM

so i got some more work done on the spot infront of the rear wheel and repainted. heres a picture of the side that didnt need any work and the side that i worked on....

240sxrb25 · 12-09-2007, 07:07 PM

this is where a big dent was between the fog light and wheel that i pulled out

and now some work behind the wheel...

inside

240sxrb25 · 12-09-2007, 07:11 PM

ill post more tomorrow. the spot behind the wheel is almost done. i got too into the work and stopped taking pictures up until the bondo part haha.

also some pics of the underneath of the car. the frame patching is done. the surface rust on the rails was ground down to shiny metal and re-undercoated, along with the floor boards.

11-23-2007, 10:24 AM	#1
Jung918 Post Whore! Join Date: Oct 2003 Location: CA Posts: 3,203 Trader Rating: (2) Feedback Score: 2 reviews	What make is your welder and which setting did you use? There should be a guide on your welder somewhere telling you which setting you should use depending on metal thickness and if you are using fluxcore wire or soild wire. __________________ Sale: Hello Kitty Horn Button S14 Rear Valences K.Y. Gordon the Thief (Tony Chen)

12-09-2007, 07:02 PM	#2
240sxrb25 Zilvia Junkie Join Date: Aug 2006 Location: omaha, ne Age: 35 Posts: 451 Trader Rating: (2) Feedback Score: 2 reviews	so i got some more work done on the spot infront of the rear wheel and repainted. heres a picture of the side that didnt need any work and the side that i worked on.... Last edited by 240sxrb25; 12-10-2007 at 09:45 PM..

12-09-2007, 07:07 PM	#3
240sxrb25 Zilvia Junkie Join Date: Aug 2006 Location: omaha, ne Age: 35 Posts: 451 Trader Rating: (2) Feedback Score: 2 reviews	this is where a big dent was between the fog light and wheel that i pulled out and now some work behind the wheel... inside Last edited by 240sxrb25; 12-10-2007 at 10:08 PM..

12-09-2007, 07:11 PM	#4
240sxrb25 Zilvia Junkie Join Date: Aug 2006 Location: omaha, ne Age: 35 Posts: 451 Trader Rating: (2) Feedback Score: 2 reviews	ill post more tomorrow. the spot behind the wheel is almost done. i got too into the work and stopped taking pictures up until the bondo part haha. also some pics of the underneath of the car. the frame patching is done. the surface rust on the rails was ground down to shiny metal and re-undercoated, along with the floor boards.