s13 hatch e brake - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*S13Boosts* · 12-10-2007, 01:38 PM

Gone*

Msglength

*S13Boosts* · 12-10-2007, 06:51 PM

ah i need to install these

projectRDM · 12-10-2007, 07:09 PM

The OE cables? They go right on like the old ones came out. One M6 bolt secures the bracket to the subframe, M8 nut holds the forward flange to the chassis, either side clips to the handle turnbuckle and the caliper bracket.

15 minutes to do both with a 5 minute piss break.

*S13Boosts* · 12-10-2007, 07:29 PM

Quote:

Originally Posted by R240NA

The OE cables? They go right on like the old ones came out. One M6 bolt secures the bracket to the subframe, M8 nut holds the forward flange to the chassis, either side clips to the handle turnbuckle and the caliper bracket.

15 minutes to do both with a 5 minute piss break.

yessir problem is i dont know where the old ones came out from lol but im pretty sure if i looked ill prob get it hooked up itll be great if i can get a write up

Xandy Boosts · 12-10-2007, 07:25 PM

His dumbass bought the car with no ebrakes installed. I'll help you out on Wednesday when I go solder the chips. Just take out the rear seat on the honda for me so I can access the fuel pump o ring and I'll assist you on that.

*S13Boosts* · 12-10-2007, 07:30 PM

Quote:

Originally Posted by Xandy Boosts

His dumbass bought the car with no ebrakes installed. I'll help you out on Wednesday when I go solder the chips. Just take out the rear seat on the honda for me so I can access the fuel pump o ring and I'll assist you on that.

why you gotta rub it in!

yeah alright.. still if theres a write up about the install post it guys thanks would be easier!

projectRDM · 12-11-2007, 12:26 AM

Quote:

Originally Posted by S13Boosts

why you gotta rub it in!

yeah alright.. still if theres a write up about the install post it guys thanks would be easier!

There is. In the FSM.

*S13Boosts* · 12-11-2007, 12:38 PM

Quote:

Originally Posted by R240NA

There is. In the FSM.

yeah found A d link thought there would be a write up in zilvia but guess not thanks Guys!

close this thread!

projectRDM · 12-11-2007, 01:49 PM

Quote:

Originally Posted by S13Boosts

yeah found A d link thought there would be a write up in zilvia but guess not thanks Guys!

close this thread!

Why would there be a writeup for replacing an OE part? There's not a writeup on installing brake pads or changing a tire.

12-10-2007, 01:38 PM	#1
S13Boosts Premium Member Join Date: Oct 2006 Location: VEGAS Posts: 5,292 Trader Rating: (12) Feedback Score: 12 reviews	s13 hatch e brake Gone* Msglength Last edited by S13Boosts; 12-17-2007 at 03:34 AM..

12-10-2007, 07:09 PM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	The OE cables? They go right on like the old ones came out. One M6 bolt secures the bracket to the subframe, M8 nut holds the forward flange to the chassis, either side clips to the handle turnbuckle and the caliper bracket. 15 minutes to do both with a 5 minute piss break. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

12-10-2007, 06:51 PM	#2
S13Boosts Premium Member Join Date: Oct 2006 Location: VEGAS Posts: 5,292 Trader Rating: (12) Feedback Score: 12 reviews	ah i need to install these

12-10-2007, 07:25 PM	#5
Xandy Boosts Zilvia FREAK! Join Date: Dec 2004 Location: Long beach Age: 39 Posts: 1,003 Trader Rating: (2) Feedback Score: 2 reviews	His dumbass bought the car with no ebrakes installed. I'll help you out on Wednesday when I go solder the chips. Just take out the rear seat on the honda for me so I can access the fuel pump o ring and I'll assist you on that.