Need Help With My Sr20de - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DDDsquad_s13panda · 12-22-2007, 08:01 PM

would anyone happen to know where to purchase header for this motor being inside a RWD drive car?..

i saw it IMPORTS mag from australia. a blue S14 with a N/A SR in it. with header. but i dont seem to find it anywhere. i ask some motorsport shop here in so-cal and even tried E-bay. but no luck

i was thinkin of jst buyin a turbo manifold and downpipe. then jst mickeymouse some brackets and all that so it fits right. so my car would be like

SR20DE 375cc injectors(SR20DET), Greddy turbo Manifold(yes i have it and installed), then the exuast manifold and downpipe..

lolx might as well go turbo..lmao. im jst sayin.. try something new.. pips wonders " I HEAR SR, BUT NO TURBO?" and they get dumbfounded.. lolx

unless someone can help me out =]

you guys rock..

n e ways.. thnks in advance.

johngriff · 12-22-2007, 08:03 PM

ebay aus. ususally has them.

If you are hard up, I can source a jp one.

DDDsquad_s13panda · 12-22-2007, 08:08 PM

ohh.. oright.. lemme check that out.. thanks alot man

RPS13nutt · 12-22-2007, 08:58 PM

g'luck with finding one that will fit for you.
I tried ebay aus i think the ones you find are the pacesetter headers. I didnt want to pay for one again to find out if it couldnt fit also

I have a s14 na sr in my 13 chassis had a header (i think fujistubo) for it and it didnt fit, the steering column was just in the way. so i sold it to a guy who had the same motor in a datsun 510 and it fits there.

I am thinking of having a custom one made here soon. depending on costs

but g'luck in finding one that will fit.

nightshiftgarage · 12-23-2007, 10:36 AM

buy a cheap header for a ka off of ebay and a mani flange form a fab place. cut the flange off of the ka header and weld the sr flange on it. it works.

PoorMans180SX · 12-23-2007, 11:29 AM

^^what he said.

Any headers made for an SRDE will hit the steering column. You could modify the piping on the header, but welding the flange is easier and probably better.

DDDsquad_s13panda · 12-23-2007, 10:42 PM

well what about my idea?... it would look cool.. but i jst wanna know bout power gain

knock-off exaust manifold. custom flange and pipe all the way to a down pipe then exuast...?.. those all sounds good..

thanks a bunch fellas

Ca_laurier · 12-23-2007, 11:23 PM

why not just but the headers than bring it to someone who knows what the heall they are doing (in other words someone who does custom turbo manifolds) and i am sure they can get it to fit

12-22-2007, 08:01 PM	#1
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	Need Help With My Sr20de would anyone happen to know where to purchase header for this motor being inside a RWD drive car?.. i saw it IMPORTS mag from australia. a blue S14 with a N/A SR in it. with header. but i dont seem to find it anywhere. i ask some motorsport shop here in so-cal and even tried E-bay. but no luck i was thinkin of jst buyin a turbo manifold and downpipe. then jst mickeymouse some brackets and all that so it fits right. so my car would be like SR20DE 375cc injectors(SR20DET), Greddy turbo Manifold(yes i have it and installed), then the exuast manifold and downpipe.. lolx might as well go turbo..lmao. im jst sayin.. try something new.. pips wonders " I HEAR SR, BUT NO TURBO?" and they get dumbfounded.. lolx unless someone can help me out =] you guys rock.. n e ways.. thnks in advance.

12-22-2007, 08:03 PM	#2
johngriff Post Whore! Join Date: Jun 2004 Location: Long Beach, CA Posts: 4,103 Trader Rating: (4) Rides Gallery: johngriff Feedback Score: 4 reviews	ebay aus. ususally has them. If you are hard up, I can source a jp one. __________________ [email protected]

12-23-2007, 10:36 AM	#5
nightshiftgarage Zilvia Member Join Date: Sep 2006 Location: tn Age: 41 Posts: 170 Trader Rating: (0) Feedback Score: 0 reviews	buy a cheap header for a ka off of ebay and a mani flange form a fab place. cut the flange off of the ka header and weld the sr flange on it. it works. __________________ "NIGHTSHIFT-GARAGE"

12-23-2007, 11:29 AM	#6
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 37 Posts: 5,616 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	^^what he said. Any headers made for an SRDE will hit the steering column. You could modify the piping on the header, but welding the flange is easier and probably better. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

12-22-2007, 08:08 PM	#3
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	ohh.. oright.. lemme check that out.. thanks alot man

12-22-2007, 08:58 PM	#4
RPS13nutt Join Date: Oct 2005 Location: J'ville/ FLA Age: 43 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	g'luck with finding one that will fit for you. I tried ebay aus i think the ones you find are the pacesetter headers. I didnt want to pay for one again to find out if it couldnt fit also I have a s14 na sr in my 13 chassis had a header (i think fujistubo) for it and it didnt fit, the steering column was just in the way. so i sold it to a guy who had the same motor in a datsun 510 and it fits there. I am thinking of having a custom one made here soon. depending on costs but g'luck in finding one that will fit.

12-23-2007, 10:42 PM	#7
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	well what about my idea?... it would look cool.. but i jst wanna know bout power gain knock-off exaust manifold. custom flange and pipe all the way to a down pipe then exuast...?.. those all sounds good.. thanks a bunch fellas

12-23-2007, 11:23 PM	#8
Ca_laurier Zilvia Junkie Join Date: Sep 2005 Location: calgary/canada Age: 39 Posts: 421 Trader Rating: (0) Feedback Score: 0 reviews	why not just but the headers than bring it to someone who knows what the heall they are doing (in other words someone who does custom turbo manifolds) and i am sure they can get it to fit