will the rims fit

[fliprayzin240sx]

Originally Posted by let5l1de

here is an example of 18x9.5 with a +28mm offset. note: pics taken w/o battleversion RUCA or any adjustment to stock RUCA

If its a real 9.5j at that offset, that should be hitting if not close to hitting coilovers.

[ALEXTHESUS*PECT]

Originally Posted by fliprayzin240sx

If its a real 9.5j at that offset, that should be hitting if not close to hitting coilovers.

not in the rear, but in the front yeah. rears have much more clearance!

[Jlee]

17 x 9.5 +15 all around on stock suspension... I have no clearance issues at all.







Hope this helps you get an idea of how yours will fit.

Jon

[jspaeth]

Originally Posted by Jlee

17 x 9.5 +15 all around on stock suspension... I have no clearance issues at all.







Hope this helps you get an idea of how yours will fit.

Jon

hahahhaha thats bc you are at monster car height

Everyone says they have no clearance problems on these 9.5 +15 or whatever offsets, but if you lower the car a bit, you will rub most certainly

[ALEXTHESUS*PECT]

Originally Posted by jspaeth

^ wow that sticks out a ton....are you sure on the size...?

18x9.5 +28 should stick out the same as (anything)x9 +22


However, my 17x9s +17 dont stick out anywhere that much....it looks like if you lowered it the rim would hit the fender

Originally Posted by jspaeth

hahahhaha thats bc you are at monster car height

Everyone says they have no clearance problems on these 9.5 +15 or whatever offsets, but if you lower the car a bit, you will rub most certainly

now remember premie..... they said stock suspension. so ride height will be higher compared to coilovers, or even springs!