Maximum TIRE(Rubber) fitment thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

300hp owen · 01-09-2008, 08:39 AM

maybe with camber bolts in the lower mounts of the tein coilovers and then setting the camber plate to full negative he was able to gain some clearance to the strut around the spring perch for such a wide wheel?

just an idea, I know a lot of guys tinker with using camber bolts in both locations on the knuckle on each side of the car and sometimes at all four corners of the car, STIs do it to gain neg. camber and some do it to gain inside wheel well clearance to the suspension.

01-09-2008, 08:39 AM	#11
300hp owen Zilvia Junkie Join Date: Mar 2007 Location: western, NY Age: 51 Posts: 531 Trader Rating: (0) Feedback Score: 0 reviews	maybe with camber bolts in the lower mounts of the tein coilovers and then setting the camber plate to full negative he was able to gain some clearance to the strut around the spring perch for such a wide wheel? just an idea, I know a lot of guys tinker with using camber bolts in both locations on the knuckle on each side of the car and sometimes at all four corners of the car, STIs do it to gain neg. camber and some do it to gain inside wheel well clearance to the suspension. __________________ cardomain.com/id/LS1T56FC = my crazy ls1 v8 rx7 = sold