Project Nissan motor mount - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jholman05 · 01-09-2008, 07:44 AM

Is anyone running the project nissan motor mounts? Im looking into getting these, while taking my motor out I noticed my driverside mount was rotten and I simply twisted it of like it was nothing. These look similar to the cusco mounts so maybe if anyone is running those what are your impressions? Close to stock feel, firm, or solid? Let me know.

At $100 (with free shipping) a set, these seem to be a pretty good deal. As seeing I need to buy at least one, and for a stock one on ebay they want about $50 this isnt that bad. I just dont want to turn my car into a vibrator

http://www.projectnissan.com/shopping/pc/viewPrd.asp?idcategory=0&idproduct=4289

emersonLP · 01-09-2008, 12:01 PM

I didn't buy those because people said they would be too firm. I went with the Nismo mounts, but if I was going to do it again, I would have purchased the Project Nissan ones. The Nismo ones really don't change the ride quality or vibrations at all. I think I could stand for stiffer.

Make sure you replace the transmission mount at the same time or (I have heard) it will possibly just break with the stress from the new motor mounts. The advantage of the Nismo transmission mount is that it has the bracket for your exhaust, I don't think any other companies offer that one, but maybe someone does now.

Finally, your other option is some mounts by someone on the forum who makes some poly ones that have gotten some attention. I estimate these would fit in between the Nismo and the Project Nissan in terms of stiffness and ride quality.

91rps13 · 01-09-2008, 12:08 PM

Quote:

Ralphie

Ok first off I ordered them on a saturday, they were process on monday and I had them in my hands on tuesday. And it was free shipping.

Ok first I opened the box to discover a well packed and protected box.
I pulled them out and inspected them for quality and such. The welds were a bit on the ugly side of things. BUT altho they were not the prettiest welds they will serve there purpose they penatrated all the through and were very solid welds again just wernt pretty. They DO NOT give you the mounting nuts. But the beautiful part about these mounts is one they are 2 piece and 2 for the set it came out to 108.25 +-.15 cents(dont have bill right here). Now they went in with no problem and I dont know about anybody else but Id rather slide the motor into place and move on over jacking up and down and pushing and prying to get that little hole on the stud. just me tho.

over all very stiff almost like solid mounts will I buy them again yes and twice on sunday GREAT PRODUCT

and the link

http://texasnissans.com/tx/forums/showthread.php?t=2090

VIPCefiro · 01-09-2008, 02:27 PM

there are a few 240 guys down here that run the project nissan mounts and they seem to be favorable and a good bang for the buck. I run the Nismo motormounts mainly because I got em cheap and while they feel stock they are much stiffer compared to the stock mounts. .

01-09-2008, 07:44 AM	#1
jholman05 Zilvia Member Join Date: Sep 2006 Location: Cincinnati Age: 37 Posts: 286 Trader Rating: (2) Feedback Score: 2 reviews	Project Nissan motor mount Is anyone running the project nissan motor mounts? Im looking into getting these, while taking my motor out I noticed my driverside mount was rotten and I simply twisted it of like it was nothing. These look similar to the cusco mounts so maybe if anyone is running those what are your impressions? Close to stock feel, firm, or solid? Let me know. At $100 (with free shipping) a set, these seem to be a pretty good deal. As seeing I need to buy at least one, and for a stock one on ebay they want about $50 this isnt that bad. I just dont want to turn my car into a vibrator http://www.projectnissan.com/shopping/pc/viewPrd.asp?idcategory=0&idproduct=4289

01-09-2008, 12:01 PM	#2
emersonLP Zilvia Junkie Join Date: Aug 2006 Location: Georgia Age: 40 Posts: 524 Trader Rating: (6) Rides Gallery: emersonLP Feedback Score: 6 reviews	I didn't buy those because people said they would be too firm. I went with the Nismo mounts, but if I was going to do it again, I would have purchased the Project Nissan ones. The Nismo ones really don't change the ride quality or vibrations at all. I think I could stand for stiffer. Make sure you replace the transmission mount at the same time or (I have heard) it will possibly just break with the stress from the new motor mounts. The advantage of the Nismo transmission mount is that it has the bracket for your exhaust, I don't think any other companies offer that one, but maybe someone does now. Finally, your other option is some mounts by someone on the forum who makes some poly ones that have gotten some attention. I estimate these would fit in between the Nismo and the Project Nissan in terms of stiffness and ride quality.

01-09-2008, 02:27 PM	#4
VIPCefiro Leaky Injector Join Date: Jun 2005 Location: 808 Honolulu Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	there are a few 240 guys down here that run the project nissan mounts and they seem to be favorable and a good bang for the buck. I run the Nismo motormounts mainly because I got em cheap and while they feel stock they are much stiffer compared to the stock mounts. .