Car rolls forward while in 1st gear with clutch pedal down! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AzNCmB · 01-30-2008, 10:59 AM

Quote:

Originally Posted by S14DB

Have you had someone push the clutch pedal while you watch the fork move?

yes, while bleeding the slave, many times...
clutch fork moves about 1 1/2 inch back and forth...

jackjack · 01-30-2008, 11:21 AM

it could be a number of things really. just check EVERYTHING. same exact thing happened to my car. i replaced master and slave cylinder. it wasnt untill i took the tranny off that i noticed my clutch was done.

xsparc · 01-30-2008, 12:03 PM

I had the exact same problem about 2 years ago. turned out my fork was sticking what i put the clutch in so when i pressed the pedal everything looked right but for the first 3/4in the fork wasnt even contacting the pressure plate. so what i did was pushed the fork against the pressure plate and held it there while i beld the slave out. a vaccuum bleeder works great for this. after i did that i havnt had a problem since.

importdude · 02-02-2008, 07:40 PM

Quote:

Originally Posted by xsparc

I had the exact same problem about 2 years ago. turned out my fork was sticking what i put the clutch in so when i pressed the pedal everything looked right but for the first 3/4in the fork wasnt even contacting the pressure plate. so what i did was pushed the fork against the pressure plate and held it there while i beld the slave out. a vaccuum bleeder works great for this. after i did that i havnt had a problem since.

so u pushed the fork toward the front or rear of car?

nissandr1ft · 02-02-2008, 07:43 PM

I had the same problem, and it was my pressure plate... RPS Max Street. They warrantied it after about a month of hassle. With my pedal adjusted to no free play the car wouldn't fully let go either. It worked correctly for ~1000 miles while I was breaking it in, and slowly got worse.

http://www.zilvia.net/f/showthread.p...RPS+max+street

xsparc · 02-03-2008, 12:10 AM

i pushed it toward the rear, so that the fork part presses the throwout bearing up against the pressure plate.

importdude · 02-03-2008, 02:34 AM

Quote:

Originally Posted by nissandr1ft

I had the same problem, and it was my pressure plate... RPS Max Street. They warrantied it after about a month of hassle. With my pedal adjusted to no free play the car wouldn't fully let go either. It worked correctly for ~1000 miles while I was breaking it in, and slowly got worse.

http://www.zilvia.net/f/showthread.p...RPS+max+street

im having problems wiht my spec stage 3

but it only does that at 4500 rpm before

then i bleed+elimiated the block and now it does it when its at 5500rpm

LA_phantom_240 · 02-03-2008, 02:40 AM

Quote:

Originally Posted by jackjack

it could be a number of things really. just check EVERYTHING. same exact thing happened to my car. i replaced master and slave cylinder. it wasnt untill i took the tranny off that i noticed my clutch was done.

Your clutch was done due to being partially engaged while standing still, I.E. constantly slipping against the flywheel.

02-02-2008, 07:43 PM	#35
nissandr1ft Zilvia Member Join Date: Sep 2004 Location: Clayton, NC Age: 41 Posts: 284 Trader Rating: (0) Feedback Score: 0 reviews	I had the same problem, and it was my pressure plate... RPS Max Street. They warrantied it after about a month of hassle. With my pedal adjusted to no free play the car wouldn't fully let go either. It worked correctly for ~1000 miles while I was breaking it in, and slowly got worse. http://www.zilvia.net/f/showthread.p...RPS+max+street __________________ ------------------------- www.carolinanissans.com -------------------------

01-30-2008, 11:21 AM	#32
jackjack Post Whore! Join Date: Feb 2007 Location: Chi Posts: 2,899 Trader Rating: (2) Feedback Score: 2 reviews	it could be a number of things really. just check EVERYTHING. same exact thing happened to my car. i replaced master and slave cylinder. it wasnt untill i took the tranny off that i noticed my clutch was done.

01-30-2008, 12:03 PM	#33
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	I had the exact same problem about 2 years ago. turned out my fork was sticking what i put the clutch in so when i pressed the pedal everything looked right but for the first 3/4in the fork wasnt even contacting the pressure plate. so what i did was pushed the fork against the pressure plate and held it there while i beld the slave out. a vaccuum bleeder works great for this. after i did that i havnt had a problem since.

02-03-2008, 12:10 AM	#36
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	i pushed it toward the rear, so that the fork part presses the throwout bearing up against the pressure plate.