SR swap pointers from experience - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Luvs2slide · 02-11-2008, 09:31 PM

Before you put the motor in, replace ALL the coolant hoses on the intake side of the motor. Also, theres a little bracket which is bolted the the rear of the motor which connects to one of the coolant lines from the turbo. I suggest you unbolt the bracket and remove it. If not, you will hardly never be able to get to it with the limited space in case of a leak there.

02-11-2008, 09:31 PM	#7
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 43 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	Before you put the motor in, replace ALL the coolant hoses on the intake side of the motor. Also, theres a little bracket which is bolted the the rear of the motor which connects to one of the coolant lines from the turbo. I suggest you unbolt the bracket and remove it. If not, you will hardly never be able to get to it with the limited space in case of a leak there.