300zx Brakes. If you have them, POST HERE! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

brage · 01-20-2003, 12:37 PM

I installed mine, and the mushyness factor is VERY low... A common problem is people installing the calipers upside down (with the bleeder screw at the bottom as opposed to the top which causes problems. There have been numerous posts regarding this on twinturbo.net!

SO... MAKE SURE YOUR BLEEDER SCREWS ARE ON THE TOP OF THE CALIPERS WHEN INSTALLING THEM!!! otherwise it is nearly impossible to bleed the top half pistons!

-jeff

01-20-2003, 12:37 PM	#1
brage Zilvia Member Join Date: Oct 2002 Location: Tempe, AZ Posts: 181 Trader Rating: (0) Feedback Score: 0 reviews	common problem I installed mine, and the mushyness factor is VERY low... A common problem is people installing the calipers upside down (with the bleeder screw at the bottom as opposed to the top which causes problems. There have been numerous posts regarding this on twinturbo.net! SO... MAKE SURE YOUR BLEEDER SCREWS ARE ON THE TOP OF THE CALIPERS WHEN INSTALLING THEM!!! otherwise it is nearly impossible to bleed the top half pistons! -jeff