mb battle's...aka work xd7 knockoffs - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ricks15 · 03-08-2008, 03:59 PM

These MB's are cheap at 150.00 a piece you can't beat it.

Ian · 03-08-2008, 04:55 PM

Quote:

Originally Posted by Tops*

I log at 60 will do the trick.

The sizing on the S13 above are the CST 9.5jx18 +15, right?

looks like 17/18 to me

i find it weird that the 18x9.5 comes in +23...

Matej · 03-08-2008, 08:50 PM

Anyone know what sizes and offsets these come in, does MB make anything deep in 18?

LB.Motoring · 03-08-2008, 08:56 PM

ewwwwwwwwwwwwwwwwww

ayuaddict · 03-08-2008, 11:22 PM

Quote:

Originally Posted by Matej

Anyone know what sizes and offsets these come in, does MB make anything deep in 18?

well according to discount tire dot com those dont come in 5x114.3 so it dont matter.

Matej · 03-08-2008, 11:41 PM

Ohhh...gheysauce, ehh, I don't like them anymore anyway haha.

I can't decide if I want a sporty look with concave wheels, or a street car deep lip look. They can both look great, tough choice.

Hmm, I'm leaning more towards deep, even though the price of MB wheels is tempting.

r-b-x · 03-09-2008, 01:25 AM

kazama is/is going to sell a 4 lug version of the cst hypers. does that mean mb can get ahold of 'em as well?

ayuaddict · 03-09-2008, 03:27 AM

Quote:

Originally Posted by Matej

Ohhh...gheysauce, ehh, I don't like them anymore anyway haha.

I can't decide if I want a sporty look with concave wheels, or a street car deep lip look. They can both look great, tough choice.

Hmm, I'm leaning more towards deep, even though the price of MB wheels is tempting.

yea dude, that polished lip sticking out past the super stretched tire look is always a sight to see. ive always liked the whole "fat lip front, concave face rear" look. if anybody, you could pull it off and that way you save money too ahaha.

BobbyDigi · 03-09-2008, 05:35 AM

Quote:

Originally Posted by Ian

i'm pretty sure that a forged wheel would do the same

you hit a LOG at 60mph

the barrel material is what you need to look t in this case....

a cast barrel will rip like paper,

a spun barrel will bend and ultimately retain air... and rolling integrity.

`i could go`on for hours

Ian · 03-09-2008, 08:17 AM

Quote:

Originally Posted by r-b-x

kazama is/is going to sell a 4 lug version of the cst hypers. does that mean mb can get ahold of 'em as well?

no

MB buys in batch, which means what they have is what they've got. No custom orders, no nothing.

I used to deal with them, this is how it is. You can't request a finish, bolt pattern, offset, anything. Their wheels are already made long before they even know they're going to sell them lol

Matej · 03-09-2008, 01:24 PM

Quote:

Originally Posted by Ian

MB buys in batch, which means what they have is what they've got. No custom orders, no nothing.

The 4-lug CST's aren't custom, they sell them normally, so if MB buys another batch it could be possible. You can already buy a set through RHD Japan for about 1400$ shipped.
I think they only make them in one size though, and it's weak, 17x9 +27.

atom · 03-09-2008, 02:08 PM

They ARE custom. Only Kazama sells the 4 lugs like the guy said above.

Anyways, I just noticed MB is gonna be selling the Manaray EXE Sportlines. I totally wanted these for my DD. Sweet.

Ian · 03-09-2008, 04:10 PM

Quote:

Originally Posted by Matej

The 4-lug CST's aren't custom, they sell them normally, so if MB buys another batch it could be possible. You can already buy a set through RHD Japan for about 1400$ shipped.
I think they only make them in one size though, and it's weak, 17x9 +27.

no we're on different pages

i meant w/e MB has, is what they're gonna sell...You can't call them and be like "hey if i get 10 guys can you do such and such?"

They present the inventory that they buy as what they produce

murda-c · 03-09-2008, 06:54 PM

Quote:

Originally Posted by BobbyDigi

I understand that you may not have experienced it personally, but i have (oem cast alero wheel) was split like a ripped piece of paper because a log fell out of the back of a truck going 60 down a highway

well if it's good enough for olds
mobile..

yokotas13 · 03-09-2008, 06:55 PM

Quote:

Originally Posted by Matej

The 4-lug CST's aren't custom, they sell them normally, so if MB buys another batch it could be possible. You can already buy a set through RHD Japan for about 1400$ shipped.
I think they only make them in one size though, and it's weak, 17x9 +27.

i can get them less than that

regardless, buying the first knockoff of a wheel is cool

but the knockoff of a knockoff

gay]

drift into a curb · 03-09-2008, 07:18 PM

What's these weigh like? My T7s weigh 20lbs even for a 18x9. I'm just curious....

sidewayz240 · 03-09-2008, 07:23 PM

Quote:

Originally Posted by yokotas13

regardless, buying the first knockoff of a wheel is cool

but the knockoff of a knockoff

gay]

Technically its not a knockoff of a knockoff, its a rebadging of a knockoff.

turbo2nr · 03-09-2008, 08:32 PM

17x9.5 is 23lb

drift into a curb · 03-09-2008, 08:48 PM

Thanks for the info. My 18x10 T7 is 21.05 lbs!!

Ian · 03-09-2008, 11:26 PM

i weighed these and they looked more like 20 lbs for 17x9.5

they feel light

articdragon192 · 03-10-2008, 12:08 AM

I'm getting a set for my Z32 for drifting. Hopefully before they run out, lol.

LB.Motoring · 03-10-2008, 12:19 AM

Quote:

Originally Posted by yokotas13

i can get them less than that

regardless, buying the first knockoff of a wheel is cool

but the knockoff of a knockoff

gay]

Grant dont get pissy you lost a edge of the market, hahah JK

I'd get a set of these if I had a S chassis still for track rims, damn stupid COrollAs

Kcheng · 03-10-2008, 01:27 AM

Does any body have a pic of how they look like from the back where it sits on the HUB/brake? i wanna see if i can get a 25mm spacer in there
thanks.

drift into a curb · 03-10-2008, 01:55 AM

with a 25mm spacer, it'll cover the wheel studs. My 20mm almost cover them I'm pretty sure.

Kcheng · 03-10-2008, 02:03 AM

i got a 25mm and the open end lugs bulge out by like 2mm maybe so i cant get it to sit on a flat back side

heiyuu · 03-10-2008, 04:25 AM

Fuck if only they offered em polished like CSTs I'd be all over this:

Ian · 03-10-2008, 08:42 AM

hitman · 03-10-2008, 10:33 AM

gay; these wheels used to be cool.
they might still be but probably not for much longer anymore lol

LB.Motoring · 03-10-2008, 10:37 AM

RIP once decently cool track rim CST's

Ian · 03-10-2008, 10:41 AM

I can guarantee that they're not gonna get played out as bad as everyone is afraid of.

I'm gonna run these until I get a job and get something better.

03-08-2008, 03:59 PM	#61
Ricks15 Nissanaholic! Join Date: Apr 2005 Location: Los Angeles, CA Age: 39 Posts: 1,661 Trader Rating: (1) Feedback Score: 1 reviews	These MB's are cheap at 150.00 a piece you can't beat it. __________________

03-08-2008, 08:50 PM	#63
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	Anyone know what sizes and offsets these come in, does MB make anything deep in 18? Last edited by Matej; 03-08-2008 at 09:11 PM..

03-08-2008, 08:56 PM	#64
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 38 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	ewwwwwwwwwwwwwwwwww __________________ Robby Leuer

03-09-2008, 07:18 PM	#76
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	What's these weigh like? My T7s weigh 20lbs even for a 18x9. I'm just curious.... __________________ Go big or go home!

03-09-2008, 08:32 PM	#78
turbo2nr Post Whore! Join Date: Jan 2005 Location: queens NYC Age: 39 Posts: 2,561 Trader Rating: (8) Feedback Score: 8 reviews	17x9.5 is 23lb __________________ s14 kouki ka-t

03-08-2008, 11:41 PM	#66
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	Ohhh...gheysauce, ehh, I don't like them anymore anyway haha. I can't decide if I want a sporty look with concave wheels, or a street car deep lip look. They can both look great, tough choice. Hmm, I'm leaning more towards deep, even though the price of MB wheels is tempting.

03-09-2008, 01:25 AM	#67
r-b-x Leaky Injector Join Date: Dec 2003 Location: vancouver Posts: 118 Trader Rating: (0) Feedback Score: 0 reviews	kazama is/is going to sell a 4 lug version of the cst hypers. does that mean mb can get ahold of 'em as well?

03-09-2008, 02:08 PM	#72
atom Zilvia FREAK! Join Date: Jan 2003 Location: San Francisco Posts: 1,196 Trader Rating: (0) Feedback Score: 0 reviews	They ARE custom. Only Kazama sells the 4 lugs like the guy said above. Anyways, I just noticed MB is gonna be selling the Manaray EXE Sportlines. I totally wanted these for my DD. Sweet.

03-09-2008, 08:48 PM	#79
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	Thanks for the info. My 18x10 T7 is 21.05 lbs!! __________________ Go big or go home!

03-10-2008, 12:08 AM	#81
articdragon192 Post Whore! Join Date: Jan 2005 Location: West covina Age: 39 Posts: 6,792 Trader Rating: (9) Feedback Score: 9 reviews	I'm getting a set for my Z32 for drifting. Hopefully before they run out, lol. __________________ Need help? Click here Still stumped? Try this Can't find what you're looking for? Here you go.

03-10-2008, 01:27 AM	#83
Kcheng Leaky Injector Join Date: Oct 2005 Location: 98281 WA Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	Does any body have a pic of how they look like from the back where it sits on the HUB/brake? i wanna see if i can get a 25mm spacer in there thanks.

03-10-2008, 01:55 AM	#84
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	with a 25mm spacer, it'll cover the wheel studs. My 20mm almost cover them I'm pretty sure. __________________ Go big or go home!

03-10-2008, 02:03 AM	#85
Kcheng Leaky Injector Join Date: Oct 2005 Location: 98281 WA Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	i got a 25mm and the open end lugs bulge out by like 2mm maybe so i cant get it to sit on a flat back side

03-10-2008, 04:25 AM	#86
heiyuu Zilvia Addict Join Date: Jun 2007 Location: winnipeg Age: 39 Posts: 875 Trader Rating: (6) Feedback Score: 6 reviews	Fuck if only they offered em polished like CSTs I'd be all over this: __________________

03-10-2008, 10:33 AM	#88
hitman Zilvia FREAK! Join Date: Mar 2006 Location: late 19th century prussia Age: 37 Posts: 1,057 Trader Rating: (3) Feedback Score: 3 reviews	gay; these wheels used to be cool. they might still be but probably not for much longer anymore lol __________________ driftparty.com

03-10-2008, 10:37 AM	#89
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 38 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	RIP once decently cool track rim CST's __________________ Robby Leuer