Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 41 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mr_240sx · 04-19-2008, 12:33 PM

17x9.5 +17 and +10.5 rear ( 6.5mm spacer)
235 40 17 all around

hotrodv · 04-19-2008, 01:28 PM

New spare are here..
ssr vienna 18x10.5 +5 here with 245/40 but they rub.. will try with 225

sirfallsalot243 · 04-19-2008, 03:14 PM

Not sure if this is the right place, but here goes...

I have a BONE stock 98 240sx... my first priority is the sr and suspension, however I cant help looking at wheels. What Im thinking is Tein Flex w/ EDFC, and something around 18x9 +10-20 front 18X10 +10-20 rear. The car wont be very low- its going to stay a daily driver. Can I run something like this with just a roll? Car wont be going much lower than 2-2.5".

GabeS14 · 04-19-2008, 03:47 PM

Quote:

Originally Posted by sirfallsalot243

Not sure if this is the right place, but here goes...

I have a BONE stock 98 240sx... my first priority is the sr and suspension, however I cant help looking at wheels. What Im thinking is Tein Flex w/ EDFC, and something around 18x9 +10-20 front 18X10 +10-20 rear. The car wont be very low- its going to stay a daily driver. Can I run something like this with just a roll? Car wont be going much lower than 2-2.5".

what do you mean with +10-20 do you mean that your offset would be anywhere from +10 to +20?
i think you should be fine..no need to pull

sirfallsalot243 · 04-19-2008, 03:56 PM

Quote:

Originally Posted by Gabe╚╗14

what do you mean with +10-20 do you mean that your offset would be anywhere from +10 to +20?
i think you should be fine..no need to pull

Yes, thats what I meant with the offset. Thanks a lot!

gsracer · 04-20-2008, 10:21 PM

eastcoastS14 · 04-20-2008, 10:24 PM

^^ mmmmmmmmmmm

DanS14RB · 04-21-2008, 09:02 PM

WISH ONE · 04-22-2008, 03:57 AM

19x10-33, 225/ 35 -3.5 of degress of camber, hammered rolled pulled fenders

Doriftogasm · 04-22-2008, 11:18 AM

Origin Front 20mm Overs 17x9.5 -3
Origin Rear 50mm Tatakidasi Overs 18x10.5 -18

ZenkiCam · 04-22-2008, 04:55 PM

^ OMG.. what size tires?

Doriftogasm · 04-22-2008, 05:31 PM

Quote:

Originally Posted by ZenkiCam

^ OMG.. what size tires?

Front: 215/45/17
Rear: 235/40/18

I'm using the Federal 595ss, just to let ya'll know, these phuckers run THICK!!!

a_ahmed · 04-22-2008, 05:58 PM

Anyone able to post in here 17x9+17 with 255/40/17 on an s13 hatch thats what ill be rocking soon... definetely will need some fender pulling, got myself an eastwood fender roller though

Finally ill post pix in here haha

nwmrkt · 04-22-2008, 08:21 PM

Quote:

Originally Posted by Doriftogasm

Origin Front 20mm Overs 17x9.5 -3
Origin Rear 50mm Tatakidasi Overs 18x10.5 -18

zomg! mmm looks so great, what are the wheel specs? Also what cage is that? cusco 4 point? Are you running a harness?

philstar · 04-22-2008, 08:59 PM

Quote:

Originally Posted by nwmrkt

zomg! mmm looks so great, what are the wheel specs? Also what cage is that? cusco 4 point? Are you running a harness?

lol you quoted the wheel specs right there.

17x9.5 -3
18x10.5 -18

I dont know what his alignment specs are but he did post up tire sizes as well. But yes that is a Cusco 4-point and he is running a stock s14 seatbelt i believe.

ant_s13 · 04-22-2008, 10:50 PM

i want more stretch than those Federals are giving on my rims, but i rang my tyre shop and they wont do the stretch with anything but a Federal because they run wide. theyre a goodyear dealer but wont do it with a goodyear

Doriftogasm · 04-22-2008, 11:30 PM

Quote:

Originally Posted by philstar

lol you quoted the wheel specs right there.

17x9.5 -3
18x10.5 -18

I dont know what his alignment specs are but he did post up tire sizes as well. But yes that is a Cusco 4-point and he is running a stock s14 seatbelt i believe.

yea, just stock belts, this cusco 4pt doesnt have a harness bar.

Alignment:
Front camber 3.5
Front caster 7.5
Front toe 0
Rear camber 3.0
Rear toe 0

ErocKs13 · 04-22-2008, 11:59 PM

Advan SA3R's
17x9 22 offset front and rear
5mm spacers up front
245/45/17
Tien HE's
This was before i lowered it and got it aligned properly

-Eric

KA240SX808 · 04-23-2008, 01:30 AM

Dan - looks sick, Do I spy Fogs? very nice, Work Mietsers (sp*)?

Entry Speed · 04-23-2008, 07:55 PM

Quote:

Originally Posted by Doriftogasm

Origin Front 20mm Overs 17x9.5 -3
Origin Rear 50mm Tatakidasi Overs 18x10.5 -18

WOW

Anymore pics of this car?

Great fucking work

Slip&Sliden 240 · 04-23-2008, 07:58 PM

Newer pic.
Same sizes
18x9.5 -22
18x11-3

KA240SX808 · 04-23-2008, 11:51 PM

my gawd Jebus lol

NismoLmgt4 · 04-24-2008, 12:32 AM

Quote:

Originally Posted by Doriftogasm

Origin Front 20mm Overs 17x9.5 -3
Origin Rear 50mm Tatakidasi Overs 18x10.5 -18

that must be at least a 5" lip! I should have gotten a phatter lip

im only 4.2 on a O-disk on work meister s1 3pc 18x10

driftedfc3s · 04-24-2008, 12:36 PM

Fronts - 17x9 spaced to a +9 with 235/40/17 tires. The fenders are only rolled, no pull.

Rears - 18x9.5 spaced to a +3 with 245/40/18 tires. The fenders are rolled and pulled.

The front bumper sits about an inch off of the ground after removing 1 collar and compressing 1/4" of preload.

rps13drift · 04-24-2008, 05:08 PM

^^ the new car looks great justin! What wheels are those? and what offsets are they before you spaced them? They look pretty nice

driftedfc3s · 04-24-2008, 05:10 PM

Quote:

Originally Posted by rps13drift

^^ the new car looks great justin! What wheels are those? and what offsets are they before you spaced them? They look pretty nice

Drifz 520B Prodrifts. The offsets are +35, but I'm working with them so we can come out with a couple new wheels with nice, low offsets.

idahotuner · 04-24-2008, 05:27 PM

Hey guys.

I need to pull my rear fenders out about 1.5 inches. How would you recommend me doing it since the car is up on jack stands and has no suspension right now. so i cant set the car down and do the baseball bat way to pull it.

i have allready rolled the lip

driftedfc3s · 04-24-2008, 05:43 PM

Quote:

Originally Posted by idahotuner

Hey guys.

I need to pull my rear fenders out about 1.5 inches. How would you recommend me doing it since the car is up on jack stands and has no suspension right now. so i cant set the car down and do the baseball bat way to pull it.

i have allready rolled the lip

Wait until you have the suspension on it. Then use a roller.

ILoveMyRHS13 · 04-24-2008, 08:06 PM

Quote:

Originally Posted by idahotuner

Hey guys.

I need to pull my rear fenders out about 1.5 inches. How would you recommend me doing it since the car is up on jack stands and has no suspension right now. so i cant set the car down and do the baseball bat way to pull it.

i have allready rolled the lip

1) Put coilovers on.
2) Set the car on the ground for few days to let the coilovers set.
3) Take baseball bat, cut skinny part off of bat.
4) Stick the baseball bat in the well and have someone push the car.
5) As the car is being pushed, push the bat down as much as you can to increase roll/pull.
6) Do this several times until you get your desired pull.
7) Slam the coilovers, then post pictures in this thread... If they're good enough.

Gnnr · 04-24-2008, 09:31 PM

Use a roller

04-20-2008, 10:21 PM	#1206
gsracer Zilvia FREAK! Join Date: Mar 2003 Location: Miami Age: 41 Posts: 1,590 Trader Rating: (7) Feedback Score: 7 reviews	__________________ ANTI-STRETCH NAZI Vortech Supercharged Vh45de S14 V8nissans.com

04-21-2008, 09:02 PM	#1208
DanS14RB Zilvia Member Join Date: Feb 2008 Location: Pasadena Age: 45 Posts: 158 Trader Rating: (2) Feedback Score: 2 reviews	__________________ Zenki and 180sx stuff for sale! S15 RHD Dash for sale!

04-22-2008, 03:57 AM	#1209
WISH ONE Post Whore! Join Date: Aug 2006 Location: orange county ca Posts: 2,738 Trader Rating: (13) Feedback Score: 13 reviews	19x10-33, 225/ 35 -3.5 of degress of camber, hammered rolled pulled fenders __________________ PARTING/SELLING MY COUPE. PM ME. Last edited by WISH ONE; 05-06-2008 at 11:35 PM..

04-24-2008, 05:08 PM	#1225
rps13drift Zilvia FREAK! Join Date: Oct 2006 Location: NJ BRO!!!! Age: 39 Posts: 1,194 Trader Rating: (6) Rides Gallery: rps13drift Feedback Score: 6 reviews	^^ the new car looks great justin! What wheels are those? and what offsets are they before you spaced them? They look pretty nice __________________ http://allies-drift.blogspot.com/

04-24-2008, 09:31 PM	#1230
Gnnr Post Whore! Join Date: Apr 2005 Location: S. FL Posts: 3,960 Trader Rating: (0) Feedback Score: 0 reviews	Use a roller __________________

04-19-2008, 12:33 PM	#1201
mr_240sx Post Whore! Join Date: Nov 2004 Location: Ottawa Age: 38 Posts: 6,320 Trader Rating: (4) Rides Gallery: mr_240sx Feedback Score: 4 reviews	17x9.5 +17 and +10.5 rear ( 6.5mm spacer) 235 40 17 all around

04-19-2008, 01:28 PM	#1202
hotrodv Zilvia Junkie Join Date: Apr 2003 Location: Modena , Italy Age: 48 Posts: 489 Trader Rating: (0) Feedback Score: 0 reviews	New spare are here.. ssr vienna 18x10.5 +5 here with 245/40 but they rub.. will try with 225

04-19-2008, 03:14 PM	#1203
sirfallsalot243 BANNED Join Date: Nov 2007 Location: Doylestown, PA Age: 37 Posts: 468 Trader Rating: (3) Feedback Score: 3 reviews	Not sure if this is the right place, but here goes... I have a BONE stock 98 240sx... my first priority is the sr and suspension, however I cant help looking at wheels. What Im thinking is Tein Flex w/ EDFC, and something around 18x9 +10-20 front 18X10 +10-20 rear. The car wont be very low- its going to stay a daily driver. Can I run something like this with just a roll? Car wont be going much lower than 2-2.5".

04-20-2008, 10:24 PM	#1207
eastcoastS14 Post Whore! Join Date: Oct 2006 Location: the land of snow potholes and no tracks Posts: 3,984 Trader Rating: (1) Feedback Score: 1 reviews	^^ mmmmmmmmmmm

04-22-2008, 11:18 AM	#1210
Doriftogasm Leaky Injector Join Date: Nov 2003 Location: united states Age: 41 Posts: 113 Trader Rating: (0) Feedback Score: 0 reviews	Origin Front 20mm Overs 17x9.5 -3 Origin Rear 50mm Tatakidasi Overs 18x10.5 -18

04-22-2008, 04:55 PM	#1211
ZenkiCam Zilvia Addict Join Date: Jun 2007 Location: Atlanta Georgia Posts: 931 Trader Rating: (4) Feedback Score: 4 reviews	^ OMG.. what size tires?

04-22-2008, 05:58 PM	#1213
a_ahmed BANNED Join Date: Mar 2006 Location: Oakville, Ontario Posts: 749 Trader Rating: (0) Rides Gallery: a_ahmed Feedback Score: 0 reviews	Anyone able to post in here 17x9+17 with 255/40/17 on an s13 hatch thats what ill be rocking soon... definetely will need some fender pulling, got myself an eastwood fender roller though Finally ill post pix in here haha

04-22-2008, 10:50 PM	#1216
ant_s13 Leaky Injector Join Date: Feb 2008 Location: Australia Age: 40 Posts: 66 Trader Rating: (0) Feedback Score: 0 reviews	i want more stretch than those Federals are giving on my rims, but i rang my tyre shop and they wont do the stretch with anything but a Federal because they run wide. theyre a goodyear dealer but wont do it with a goodyear

04-22-2008, 11:59 PM	#1218
ErocKs13 Zilvia Member Join Date: Feb 2006 Location: oklahoma Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	Advan SA3R's 17x9 22 offset front and rear 5mm spacers up front 245/45/17 Tien HE's This was before i lowered it and got it aligned properly -Eric

04-23-2008, 07:58 PM	#1221
Slip&Sliden 240 Zilvia Member Join Date: May 2004 Location: Washington Age: 38 Posts: 237 Trader Rating: (1) Feedback Score: 1 reviews	Newer pic. Same sizes 18x9.5 -22 18x11-3

04-24-2008, 12:36 PM	#1224
driftedfc3s Leaky Injector Join Date: May 2006 Location: jersey Posts: 117 Trader Rating: (0) Feedback Score: 0 reviews	Fronts - 17x9 spaced to a +9 with 235/40/17 tires. The fenders are only rolled, no pull. Rears - 18x9.5 spaced to a +3 with 245/40/18 tires. The fenders are rolled and pulled. The front bumper sits about an inch off of the ground after removing 1 collar and compressing 1/4" of preload.

04-24-2008, 05:27 PM	#1227
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 36 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Hey guys. I need to pull my rear fenders out about 1.5 inches. How would you recommend me doing it since the car is up on jack stands and has no suspension right now. so i cant set the car down and do the baseball bat way to pull it. i have allready rolled the lip