ka24de PROBLEM

[osal]

i am about to buy another ecu from this zilvia member..so i ll chek on dat....i ll check injectors too, i only cheked by unpluggin each one while the car was running and the idle changed so i assume they were good..but i will chek fsm to chek the ohms....

i have a question thou...i bought this conzult cable from ebay and i have a software for it...however my computer does not read it...i m wondering if it is because i have vista or maybe the ddl connector is not workin, is there a way to check that connector to make sure is workin??..

[darkslide]

Originally Posted by osal

i am about to buy another ecu from this zilvia member..so i ll chek on dat....i ll check injectors too, i only cheked by unpluggin each one while the car was running and the idle changed so i assume they were good..but i will chek fsm to chek the ohms....

i have a question thou...i bought this conzult cable from ebay and i have a software for it...however my computer does not read it...i m wondering if it is because i have vista or maybe the ddl connector is not workin, is there a way to check that connector to make sure is workin??..

do you have any buddies with a s14 maybe u can swap the ecu b4 buying another one, kinda to verify that its the problem b4 you waste some cash money

is the software from blaZt? if so they got a FAQ section
http://www.blazt.biz/forum/faq.php?s...a36e993c00ba17

also might wanna check this one out
http://202.43.230.118/