The "Identify this" thread - Page 103 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bejota180sx · 06-19-2008, 06:28 PM

sorry didnt really specify what i wanted earlier...
where can i find the side vents on the front bumper i know who makes them just cant seem to find a seller and who makes the middle one?

bejota180sx · 06-19-2008, 06:30 PM

Quote:

Originally Posted by bejota180sx

who makes this front lip or at least any info on it?

thanks

still no one with info on the lip?

Taniguchi_Is_#1 · 06-19-2008, 07:27 PM

Quote:

Originally Posted by bejota180sx

sorry didnt really specify what i wanted earlier...
where can i find the side vents on the front bumper i know who makes them just cant seem to find a seller and who makes the middle one?

http://www.m-99.co.uk/Car_Bodykits/N...n_skyline.html

r32 N1 vents. they work. look that the bottom of that link. the center vent is made by nissan; that's what a cutout plate holder looks like.

kuruptR · 06-20-2008, 12:42 PM

Quote:

Originally Posted by Taniguchi_Is_#1

http://www.m-99.co.uk/Car_Bodykits/N...n_skyline.html

r32 N1 vents. they work. look that the bottom of that link. the center vent is made by nissan; that's what a cutout plate holder looks like.

Full cut out on mine, we dont need front plates here.

n240sxfnatic · 06-21-2008, 08:56 AM

Is this for ac or what is it and can i rip it out? Pardon the wiring mess its being re-done.

devonkyle77 · 06-21-2008, 08:57 AM

Quote:

Originally Posted by n240sxfnatic

Is this for ac or what is it and can i rip it out? Pardon the wiring mess its being re-done.

yes its for ac

Cutless01 · 06-21-2008, 11:41 AM

what the bloody hell is this thing that was under my rear seat? Sorry this is my first rebuild and I have no idea wtf this is, and the screwed it down with like Lock-Tite or some shit, cuz my drill isnt strong enough to get it off, even at full torque it just dies

Any info on what it is and how the f* to get it off?

joefresh · 06-21-2008, 11:54 AM

cutless- its an airbag sensor. use a wrench for the bolts on the cover and a torx t50 bit iirc for the torx bolts. goodluck

JVD · 06-21-2008, 02:45 PM

Step 1: Put down the philips head.

Step 2: Use socket wrench.

Cutless01 · 06-21-2008, 02:49 PM

^step 3, use the socket wrench the size of your forearm just to make sure you get the job done right.

cept now Im paranoid about setting the airbags off and trashing my dash, lol.

VAs13 · 06-21-2008, 07:52 PM

what is the difference in the silvia trunk locks, i.e which came on s13 silvias w sr's

titopr06 · 06-22-2008, 10:51 AM

http://www.nissansilvia.com/forums/i...post&id=101536

anyone know what front lip it is or where i can get it?

**ThatGuy** · 06-22-2008, 11:01 AM

Quote:

Originally Posted by VAs13

what is the difference in the silvia trunk locks, i.e which came on s13 silvias w sr's

Square style came on the Zenkis.
Round came on the Chukis.

Squares matches the back of the S13 better IMHO, so that is what is on my car.

bboyoracle · 06-22-2008, 11:17 AM

Quote:

Originally Posted by titopr06

http://www.nissansilvia.com/forums/i...post&id=101536

anyone know what front lip it is or where i can get it?

Are you serious? The website is on the picture.

www.topstage.com

Ninjabread · 06-22-2008, 11:40 PM

Identify wheel fitment.

YES, i KNOW it says 17x9 +15 and 18x9.5 +12

but obviously you can see some sort of bolt on spacer in the front.

ZenkiKid · 06-22-2008, 11:57 PM

Quote:

Originally Posted by titopr06

http://www.nissansilvia.com/forums/i...post&id=101536

anyone know what front lip it is or where i can get it?

you can get it at bings.ca

G'z_Silvia · 06-23-2008, 02:18 PM

hey all, got this soarer for $1500, so i couldnt go wrong. The modifications on the car are worth that much. However, i dont know any previous history. Tried searching the net but couldnt come up with much. Just curious as to what BOV and rims these are. The BOV looks like an HKS sequential but its got a horn peice too. Again please identify BOV and Rims

Thanks

bejota180sx · 06-23-2008, 02:33 PM

Quote:

Originally Posted by G'z_Silvia

please identify BOV

it looks like the trumpet from a blitz BOV stuck into a SSQV

Brian · 06-23-2008, 03:05 PM

Quote:

Originally Posted by Ninjabread

Identify wheel fitment.

YES, i KNOW it says 17x9 +15 and 18x9.5 +12

but obviously you can see some sort of bolt on spacer in the front.

Hmmm, it is a bolt on, so I would say 15mm
Maybe it could be 10mm

bejota180sx · 06-23-2008, 03:56 PM

Quote:

Originally Posted by Brian

Hmmm, it is a bolt on, so I would say 15mm
Maybe it could be 10mm

yeah i was going to say 15mm also... but now that you 10mm i think thats more likely to be the size of that bolt on...

PoorMans180SX · 06-23-2008, 05:39 PM

I'm pretty sure on the video it says 17X9+0, indicating a 15mm spacer. I'll double check when I get home.

Taniguchi_Is_#1 · 06-23-2008, 05:40 PM

Quote:

Originally Posted by Ninjabread

Identify wheel fitment.

YES, i KNOW it says 17x9 +15 and 18x9.5 +12

but obviously you can see some sort of bolt on spacer in the front.

from looking at the fenders, 17x9 +15 and 18x9.5 +12 looks about right. 17x9 +30 with a 15mm bolt on makes sense. the fender mods look like the old tried and true cr-kai fitment.

Ninjabread · 06-23-2008, 05:41 PM

Probably same with the rear then?

send me that vid! omg.

Thanks you and BRAIN.

YoungGun · 06-24-2008, 10:04 AM

Que kit? Also, does it have rear overfenders? The gas lid is screwing with me.

Brian · 06-24-2008, 10:20 AM

BN Sports

Yes, obviously it has overfenders.

lflkajfj12123 · 06-24-2008, 11:37 AM

BN Sports TYPE II

and the car is custom rear widebody

bubble text says if you're interested

baka to yobareru ni wa
baka jya dame
kageki waido maan wa
dakyounashi no meiku & torai kara
umareru no sa!

***CrimsonRockett*** · 06-24-2008, 01:22 PM

Quote:

Originally Posted by CrimsonRockett

Who makes these two valances?(Off a 180sx)

Anyone?

Kinda bugging me that I don't know.

karl wasabi · 06-24-2008, 01:26 PM

Anyone know what color this is? Specifically a color code. I know there is a paint thread, but no one responded in it.

lflkajfj12123 · 06-24-2008, 04:57 PM

your best bet is to print out a high quality picture of that

goto your local auto paint store

sit around with the oldest guy there looking through samples to which one looks like it or see if they can make a new one

its probably just a custom mix like almost all cars

Slideways_Kiwi · 06-25-2008, 04:29 AM

Quote:

Originally Posted by CrimsonRockett

Anyone?

Kinda bugging me that I don't know.

Looks like standard Kouki aero to me.

06-22-2008, 10:51 AM	#3072
titopr06 Zilvia Junkie Join Date: May 2008 Location: AL Posts: 381 Trader Rating: (68) Feedback Score: 68 reviews	anyone know what front lip this is? http://www.nissansilvia.com/forums/i...post&id=101536 anyone know what front lip it is or where i can get it?

06-22-2008, 11:40 PM	#3075
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 36 Posts: 3,492 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Identify wheel fitment. YES, i KNOW it says 17x9 +15 and 18x9.5 +12 but obviously you can see some sort of bolt on spacer in the front. __________________ 613DriftWerks.ca

06-23-2008, 02:18 PM	#3077
G'z_Silvia Join Date: Nov 2007 Location: Ontario Age: 38 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	hey all, got this soarer for $1500, so i couldnt go wrong. The modifications on the car are worth that much. However, i dont know any previous history. Tried searching the net but couldnt come up with much. Just curious as to what BOV and rims these are. The BOV looks like an HKS sequential but its got a horn peice too. Again please identify BOV and Rims Thanks __________________ '92 JDM Nissan Silvia

06-23-2008, 05:39 PM	#3081
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 37 Posts: 5,616 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	I'm pretty sure on the video it says 17X9+0, indicating a 15mm spacer. I'll double check when I get home. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

06-23-2008, 05:41 PM	#3083
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 36 Posts: 3,492 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Probably same with the rear then? send me that vid! omg. Thanks you and BRAIN. __________________ 613DriftWerks.ca

06-21-2008, 08:56 AM	#3065
n240sxfnatic Zilvia Junkie Join Date: Apr 2007 Location: West Des Moines, Ia Age: 37 Posts: 493 Trader Rating: (6) Feedback Score: 6 reviews	Is this for ac or what is it and can i rip it out? Pardon the wiring mess its being re-done.

06-21-2008, 11:41 AM	#3067
Cutless01 Leaky Injector Join Date: Aug 2005 Location: Orlando Age: 41 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	what the bloody hell is this thing that was under my rear seat? Sorry this is my first rebuild and I have no idea wtf this is, and the screwed it down with like Lock-Tite or some shit, cuz my drill isnt strong enough to get it off, even at full torque it just dies Any info on what it is and how the f* to get it off?

06-21-2008, 11:54 AM	#3068
joefresh Zilvia Junkie Join Date: May 2007 Location: socal Posts: 451 Trader Rating: (11) Feedback Score: 11 reviews	cutless- its an airbag sensor. use a wrench for the bolts on the cover and a torx t50 bit iirc for the torx bolts. goodluck

06-21-2008, 02:45 PM	#3069
JVD Nissanaholic! Join Date: Feb 2005 Location: Alberta, Canada Age: 36 Posts: 1,820 Trader Rating: (0) Feedback Score: 0 reviews	Step 1: Put down the philips head. Step 2: Use socket wrench.

06-21-2008, 02:49 PM	#3070
Cutless01 Leaky Injector Join Date: Aug 2005 Location: Orlando Age: 41 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	^step 3, use the socket wrench the size of your forearm just to make sure you get the job done right. cept now Im paranoid about setting the airbags off and trashing my dash, lol.

06-21-2008, 07:52 PM	#3071
VAs13 Nissanaholic! Join Date: Nov 2006 Location: Tampa, FL Posts: 2,099 Trader Rating: (28) Feedback Score: 28 reviews	what is the difference in the silvia trunk locks, i.e which came on s13 silvias w sr's

06-24-2008, 10:04 AM	#3084
YoungGun Post Whore! Join Date: Nov 2007 Location: 818-951 SoCal Posts: 3,961 Trader Rating: (23) Feedback Score: 23 reviews	Que kit? Also, does it have rear overfenders? The gas lid is screwing with me.

06-24-2008, 10:20 AM	#3085
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	BN Sports Yes, obviously it has overfenders. __________________ http://bhworld.wordpress.com/

06-24-2008, 11:37 AM	#3086
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	BN Sports TYPE II and the car is custom rear widebody bubble text says if you're interested baka to yobareru ni wa baka jya dame kageki waido maan wa dakyounashi no meiku & torai kara umareru no sa!

06-24-2008, 01:26 PM	#3088
karl wasabi Post Whore! Join Date: Dec 2006 Location: Walnut/SoCal Posts: 3,898 Trader Rating: (41) Feedback Score: 41 reviews	Anyone know what color this is? Specifically a color code. I know there is a paint thread, but no one responded in it.

06-24-2008, 04:57 PM	#3089
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	your best bet is to print out a high quality picture of that goto your local auto paint store sit around with the oldest guy there looking through samples to which one looks like it or see if they can make a new one its probably just a custom mix like almost all cars