mesh rims - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

adey · 03-11-2003, 02:45 AM

I've got a set of 3-piece forged (afaik) 16x7 and 16x8 (+35 and +38 respectively) Volk Racing "Super Fine Rim" mesh wheels. they have about a 1" lip and a 1.5" lip respectively; not bad for the FWDish offsets. This can all be fixed with the aid of spacers, though.

one of the 16x7 is SLIGHTLY (i.e. can't tell by looking at it, holds air perfectly, correctable with tire balancing weights) bent, but this is only seen when you put the wheel/tire on a tire balancer.
I have all center caps, but one center cap is missing the "VR rays engineering" sticker.

$550 wheels only (OBO)
$700 with 2 Bridgestone S02 (205/55/16, 30% tread left on the 7") and with 2 Yokohama AVS ES100 205/55/16 unmounted, brand new.

edit: email or PM or reply if you're interested! I'd consider trading for 15x7 OR WIDER low offset (lower than +25 preferred) wheels.

03-11-2003, 02:45 AM	#1
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	I've got a set of 3-piece forged (afaik) 16x7 and 16x8 (+35 and +38 respectively) Volk Racing "Super Fine Rim" mesh wheels. they have about a 1" lip and a 1.5" lip respectively; not bad for the FWDish offsets. This can all be fixed with the aid of spacers, though. one of the 16x7 is SLIGHTLY (i.e. can't tell by looking at it, holds air perfectly, correctable with tire balancing weights) bent, but this is only seen when you put the wheel/tire on a tire balancer. I have all center caps, but one center cap is missing the "VR rays engineering" sticker. $550 wheels only (OBO) $700 with 2 Bridgestone S02 (205/55/16, 30% tread left on the 7") and with 2 Yokohama AVS ES100 205/55/16 unmounted, brand new. edit: email or PM or reply if you're interested! I'd consider trading for 15x7 OR WIDER low offset (lower than +25 preferred) wheels. __________________ Instagram: @SX180HKG