Rear axels won't spin after Z32 Upright install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

UNISA JECS · 06-22-2008, 10:06 PM

Ok this is what you do:

TABED HUB'S CAN ONLY USE THE ANCHOR BLOCK BOLT ON THE LEFT PERIOD!

NON-TABED HUBS CAN USE THE ANCHOR BLOCK BOLT ON THE LEFT WITH TWO AXLE WASHERS OR THEY CAN USE THE ANCHOR BLOCK BOLT ON THE RIGHT BY REMOVING THE HEX BOLT AND DISCARDING IT.

THERE YOU GO, ITS VERY SIMPLE

THE USE OF 2 AXLE WASHERS ON LEFT ANCHOR BLOCK PIN MAKES UP FOR THE MISSING TAB ON THE HUB.

06-22-2008, 10:06 PM	#7
UNISA JECS Nissanaholic! Join Date: Feb 2007 Location: Socal Fontana Age: 46 Posts: 2,380 Trader Rating: (40) Feedback Score: 40 reviews	Ok this is what you do: TABED HUB'S CAN ONLY USE THE ANCHOR BLOCK BOLT ON THE LEFT PERIOD! NON-TABED HUBS CAN USE THE ANCHOR BLOCK BOLT ON THE LEFT WITH TWO AXLE WASHERS OR THEY CAN USE THE ANCHOR BLOCK BOLT ON THE RIGHT BY REMOVING THE HEX BOLT AND DISCARDING IT. THERE YOU GO, ITS VERY SIMPLE THE USE OF 2 AXLE WASHERS ON LEFT ANCHOR BLOCK PIN MAKES UP FOR THE MISSING TAB ON THE HUB. __________________ PARTS 4 SALE !! Z32 E-Brake/Parking Brake Heatshield Assemblys!!! *Rep/Feedbacks*