RB25DET lower harness has extra plugs and wires?

[Z U L8R]

use your car's lower harness not the rb lower harness. cut out the knock sensors and idle control plugs from the rb's lower harness. for the reverse lights and all that, cut the plugs off the very end of the rb lower harness and splice them to your lower harness in the coordinating positions.

Dave

[KPNITRL]

Originally Posted by Z U L8R

use your car's lower harness not the rb lower harness. cut out the knock sensors and idle control plugs from the rb's lower harness. for the reverse lights and all that, cut the plugs off the very end of the rb lower harness and splice them to your lower harness in the coordinating positions.

Dave

Thanks for the reply. I am using the cars lower harness but at the end that harness there is only the VSS plug to tap into. But on the RB harness there is the VSS plug, and two other plugs which lead to a square plug at the other side of the RB harness. which I'm guessing would be the reverse lights and such