brake job help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

lVll2. S14 · 03-15-2003, 01:45 AM

u all are misinformed...........ur supposed to undo the little cap in the rear brakes then as u let it bleed use the needle nose pliers to grip the piston by the little indentations on the sides of the pistons...there should be four of them....rotate in a clockwise motion ....im pretty sure it was clockwise.....the piston should go back into teh caliper slowly...just do this slowly not to damage the seal or the piston. keep on doing it until there is enuf clearance for the caliper to fit back onto the pds and rotor.

03-15-2003, 01:45 AM	#6
lVll2. S14 Leaky Injector Join Date: Jun 2002 Location: San Francisco Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	u all are misinformed...........ur supposed to undo the little cap in the rear brakes then as u let it bleed use the needle nose pliers to grip the piston by the little indentations on the sides of the pistons...there should be four of them....rotate in a clockwise motion ....im pretty sure it was clockwise.....the piston should go back into teh caliper slowly...just do this slowly not to damage the seal or the piston. keep on doing it until there is enuf clearance for the caliper to fit back onto the pds and rotor.