-10 oil return line- what do i weld to the pan? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gotta240 · 07-07-2008, 01:33 AM

I will be running a -10 oil return line from my t25 ka-t. I don't have the lines with me, nor do i know much about them.

What do i need to weld into my oil pan so i can easily connect the -10 line later? I know JGS sells a 1/2 threaded fitting, but is that the best/most used route to connect to -10an?

Also, can i use a threaded portion from like home depot or are they threaded differently?

thanks

07-07-2008, 01:33 AM	#1
gotta240 Post Whore! Join Date: Dec 2005 Location: so cal Posts: 3,496 Trader Rating: (21) Feedback Score: 21 reviews	-10 oil return line- what do i weld to the pan? I will be running a -10 oil return line from my t25 ka-t. I don't have the lines with me, nor do i know much about them. What do i need to weld into my oil pan so i can easily connect the -10 line later? I know JGS sells a 1/2 threaded fitting, but is that the best/most used route to connect to -10an? Also, can i use a threaded portion from like home depot or are they threaded differently? thanks