s14 turn signal help!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mikeyyy · 07-09-2008, 11:57 PM

i was in the middle of driving and my turn signals LITTERALLY just stopped working. when i got home, i changed to brand new fuses but it still wouldnt work. On top of that, my hazards became out too. The rest of my lights still work though. (headlights, taillights, brake lights)

any ideas?

S-Nation S13 · 07-10-2008, 12:09 AM

look for continuity either ground or power wire for that light all your lights work so dont worry bout them just single out that one harness. if you disconnect hazard switch you lose both turn signals it might be a malfunction with in the hazard switch look for a spare or a known working one plug in and see if turn signals work if not its the harness connecting to tha hazard switch that is at fault PM me if your lost hope that lil bit of info helps

Mikey88 · 07-10-2008, 12:13 AM

have you checked your blinker fluid? jp lol check the combination flasher unit or check the hazard switch itself you must have an open somewhere in that circuit.

*downshift_sideways* · 07-10-2008, 12:25 AM

Agreed check your hazard switch.

and the fuse to that.

It dominoe's to the turn signals.

projectRDM · 07-10-2008, 08:02 AM

Or check the flasher, it's more prone to go out than the hazard switch.

mikeyyy · 07-11-2008, 12:58 AM

okay so if i get my hazard light fixed, it should fix the turn signals as well? because the turn signals dont work inside or outside (i hope that made sense)

but i guess ill check the flasher relay and let everyone know how it goes

*downshift_sideways* · 07-11-2008, 01:17 AM

Trail and error.

report back then.

07-09-2008, 11:57 PM	#1
mikeyyy Zilvia Member Join Date: Jan 2008 Location: houston, tx Posts: 175 Trader Rating: (2) Feedback Score: 2 reviews	s14 turn signal help!!! i was in the middle of driving and my turn signals LITTERALLY just stopped working. when i got home, i changed to brand new fuses but it still wouldnt work. On top of that, my hazards became out too. The rest of my lights still work though. (headlights, taillights, brake lights) any ideas?

07-10-2008, 12:25 AM	#4
downshift_sideways No Limit Soldier. Join Date: Jan 2006 Location: Hayward CA, San Gabriel CA Age: 38 Posts: 5,550 Trader Rating: (0) Rides Gallery: downshift_sideways Feedback Score: 0 reviews	Agreed check your hazard switch. and the fuse to that. It dominoe's to the turn signals. __________________ allntrlundrgrnd: "you never really appreciate your parents fridge until you look into your own and its full of condiments only"

07-10-2008, 08:02 AM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Or check the flasher, it's more prone to go out than the hazard switch. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

07-11-2008, 01:17 AM	#7
downshift_sideways No Limit Soldier. Join Date: Jan 2006 Location: Hayward CA, San Gabriel CA Age: 38 Posts: 5,550 Trader Rating: (0) Rides Gallery: downshift_sideways Feedback Score: 0 reviews	Trail and error. report back then. __________________ allntrlundrgrnd: "you never really appreciate your parents fridge until you look into your own and its full of condiments only"

07-10-2008, 12:09 AM	#2
S-Nation S13 Post Whore! Join Date: Jan 2008 Location: LAND of the LOST Posts: 4,083 Trader Rating: (92) Feedback Score: 92 reviews	look for continuity either ground or power wire for that light all your lights work so dont worry bout them just single out that one harness. if you disconnect hazard switch you lose both turn signals it might be a malfunction with in the hazard switch look for a spare or a known working one plug in and see if turn signals work if not its the harness connecting to tha hazard switch that is at fault PM me if your lost hope that lil bit of info helps

07-10-2008, 12:13 AM	#3
Mikey88 Zilvia Member Join Date: Jul 2008 Location: Somewhere in California Age: 36 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	have you checked your blinker fluid? jp lol check the combination flasher unit or check the hazard switch itself you must have an open somewhere in that circuit.

07-11-2008, 12:58 AM	#6
mikeyyy Zilvia Member Join Date: Jan 2008 Location: houston, tx Posts: 175 Trader Rating: (2) Feedback Score: 2 reviews	okay so if i get my hazard light fixed, it should fix the turn signals as well? because the turn signals dont work inside or outside (i hope that made sense) but i guess ill check the flasher relay and let everyone know how it goes