|
|
|||||||
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
|
|
09-11-2008, 04:14 PM
|
#1 |
|
Post Whore!
 
|
Come on...
This is simple stuff. You take the only 2 nuts off of it, which is where the brake M/C is bolted to, and the whole thing just slides out. Just gotta make sure you've disconnected the brake M/C adjustment rod from the clutch pedal before you yank. |
|
|
| Sponsored Links |
|
09-11-2008, 04:26 PM
|
#2 | |
|
Post Whore!
 
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
  Feedback Score: 5 reviews
|
Quote:
 Take off the brake master cylinder. Take off the clevis pin that holds the brake pedal to the booster pushrod. Take out 4 bolts from inside the passenger compartment. Take out the booster. |
|
|
|
|
|
09-11-2008, 04:30 PM
|
#3 |
|
Zilvia.net Advertiser
 
Join Date: Mar 2003
Location: NOLA
Age: 48
Posts: 1,972
Trader Rating: (3)
Feedback Score: 3 reviews
|
He is sking about theBooster... Not the MC!!
Booster has 4 bolts on the unit itself... the nuts are located on the inside of the car... top of the brake pedal... you will also have to get creative in unthreading the pushrod from the pedal. Needle Nosed Vice Grip should do the trick. Its alot harder getting the Z32 Booster in place with out scratching or damaging it on the Wheel well. The pushrod is a huge pain in the ass when Installing also.... you will have a bad back when your done!! -Drew  |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
