Quote:
Originally posted by Maeda
i think i could set the injector to go off based on rpm? so it would sorta be around where full boost is achieved... say i set it to 3000 or so and then scale it as the roms go up to spray more...
then i could turn up the boost independently and adjust for the alky right?
|
See.. the only problem with an idea like that that ALWAYS uses the injectors is you're going to run out of alky or water just driving around... if you go above 3k rpms, you'll use the fluid without needing it. Also, you don't want to rely on something like that, because you'll be boosting at say 14psi (when you should be at 10psi) and run out of the detonation retarder (alky or water) and... detonate.
-Jeff
04-15-2003, 03:08 PM
Hybrid Mode
