Turbo elbow welded to downpipe? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SR2Zero · 09-20-2008, 05:37 PM

So, I bought a used greddy elbow from somebody on here.... and he basically cut the studs. I can get a grip on them, but yet they aren't budging (I've tried heating it up and using vice grips, and doing the two nut method, nothing... if you have any other ideas, be my guest)
So I figured it basically just be easiest to have my megan downpipe welded to the turbo elbow.

Now, will I have enough room/clearance to mount this onto the engine while it's in the car? I know the circuit sports one is one piece, yet it is also slimmer.

Thanks in advance everyone.

09-20-2008, 05:37 PM	#1
SR2Zero Zilvia Addict Join Date: Apr 2008 Location: SC Age: 35 Posts: 639 Trader Rating: (6) Feedback Score: 6 reviews	Turbo elbow welded to downpipe? So, I bought a used greddy elbow from somebody on here.... and he basically cut the studs. I can get a grip on them, but yet they aren't budging (I've tried heating it up and using vice grips, and doing the two nut method, nothing... if you have any other ideas, be my guest) So I figured it basically just be easiest to have my megan downpipe welded to the turbo elbow. Now, will I have enough room/clearance to mount this onto the engine while it's in the car? I know the circuit sports one is one piece, yet it is also slimmer. Thanks in advance everyone.