S15 T28 Oil Drain dont line up!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

corey240 · 12-03-2008, 05:14 PM

I bought a brand new oil drain tube for my t28 from ebay, its the same thing as the one on frsport. It doesnt line up with my t28. Heres how basd it is. I egged out my stock t25 one for my old t28, but this one isnt big enough to do that. I tested it on a t25, and its too small, I tested it on my s14 sr and it did fit fine. So it doesnt make sense it doesn fit on an s15 turbo. Do you have to buy it specific for an s15? WTF is up with this.

Def · 12-03-2008, 10:15 PM

Did you put teflon tape on your AN water line connections?

corey240 · 12-03-2008, 10:23 PM

Yes I did.

blu808 · 12-03-2008, 10:25 PM

yes. The t25 one doesnt fit.

You will need to either mod it, or purchase a s15 one.

Luke

Flybert · 12-03-2008, 10:26 PM

Quote:

Originally Posted by corey240

Yes I did.

You only put teflon on the pipe thread going into the turbo. AN is designed so you don't have to put teflon on there. You're setup is more likely to leak that way.

memphiss13 · 12-03-2008, 10:26 PM

ah nevermind i looked at the pic again not sure how you are going to make that one work. and yeah no teflon needed on an lines.

Def · 12-03-2008, 10:50 PM

Quote:

Originally Posted by Flybert

You only put teflon on the pipe thread going into the turbo. AN is designed so you don't have to put teflon on there. You're setup is more likely to leak that way.

Don't give advice unless you know what you're talking about - the thread going into the turbo on the water jacket is M14x1.5mm - NOT a pipe thread, or even the same type of thread.

Teflon belongs on NO part of the turbo plumbing setup. They are all parallel threads, and the sealing is not done by the threads. AN fittings seal on the 37 degree flare, not on the threads. Putting teflon tape on any of them is a joke...

corey240 · 12-04-2008, 02:22 AM

That is for an s15. Thats what dont make any sense. This thread isnt about teflon tape so drop it. It isnt gona hurt anything,

burnsauto · 12-04-2008, 02:26 AM

Quote:

Originally Posted by corey240

That is for an s15. Thats what dont make any sense. This thread isnt about teflon tape so drop it. It isnt gona hurt anything,

yes it can, take it off.

Back on topic. As far as it being an S15 one...are you positive? It looks brand spankin new, but double check with who you got it from, maybe something got screwed up along the way. Show them the pics of it not lining up and maybe they'll help you out (like sending you a new one that will fit.)

Def · 12-04-2008, 09:14 AM

Quote:

Originally Posted by corey240

That is for an s15. Thats what dont make any sense. This thread isnt about teflon tape so drop it. It isnt gona hurt anything,

Yes it can, and it looks stupid to top it off.

An S13 oil drain fits just fine on an S15 T28/GT2560R whatever you want to call it. You just have to elongate the mounting holes slightly.

SoSideways · 12-04-2008, 11:45 AM

If the S15 oil drain tube doesn't fit on the turbo, then your turbo is not a true Garrett ball bearing center T28 unit.

My S15 oil drain tube bolted up to my HKS turbo fine, it just ended up pointing in the wrong direction for me to put the rubber hose on it, so I ended up using the T25 oil drain tube on there, with the 2 holes elongated of course.

So my take on this is that, your turbo itself seems to be the culprit.

Since you mentioned eBay and refuse to listen to people's advice about NOT USING TEFLON TAPE ON AN FITTINGS, I can only assume you bought your turbo off eBay and got something that's not a real Garrett ball bearing T28.

12-03-2008, 05:14 PM	#1
corey240 Zilvia Junkie Join Date: Dec 2005 Location: Cumberland, Maryland Age: 36 Posts: 508 Trader Rating: (2) Feedback Score: 2 reviews	S15 T28 Oil Drain dont line up!!! I bought a brand new oil drain tube for my t28 from ebay, its the same thing as the one on frsport. It doesnt line up with my t28. Heres how basd it is. I egged out my stock t25 one for my old t28, but this one isnt big enough to do that. I tested it on a t25, and its too small, I tested it on my s14 sr and it did fit fine. So it doesnt make sense it doesn fit on an s15 turbo. Do you have to buy it specific for an s15? WTF is up with this. __________________ Email: [email protected]

12-03-2008, 10:23 PM	#3
corey240 Zilvia Junkie Join Date: Dec 2005 Location: Cumberland, Maryland Age: 36 Posts: 508 Trader Rating: (2) Feedback Score: 2 reviews	Yes I did. __________________ Email: [email protected]

12-03-2008, 10:25 PM	#4
blu808 Post Whore! Join Date: Dec 2002 Location: Campbell, Ca Age: 42 Posts: 5,010 Trader Rating: (3) Feedback Score: 3 reviews	yes. The t25 one doesnt fit. You will need to either mod it, or purchase a s15 one. Luke __________________

12-04-2008, 02:22 AM	#8
corey240 Zilvia Junkie Join Date: Dec 2005 Location: Cumberland, Maryland Age: 36 Posts: 508 Trader Rating: (2) Feedback Score: 2 reviews	That is for an s15. Thats what dont make any sense. This thread isnt about teflon tape so drop it. It isnt gona hurt anything, __________________ Email: [email protected]

12-04-2008, 11:45 AM	#11
SoSideways Post Whore! Join Date: Apr 2003 Location: 你老母 Posts: 4,371 Trader Rating: (4) Feedback Score: 4 reviews	If the S15 oil drain tube doesn't fit on the turbo, then your turbo is not a true Garrett ball bearing center T28 unit. My S15 oil drain tube bolted up to my HKS turbo fine, it just ended up pointing in the wrong direction for me to put the rubber hose on it, so I ended up using the T25 oil drain tube on there, with the 2 holes elongated of course. So my take on this is that, your turbo itself seems to be the culprit. Since you mentioned eBay and refuse to listen to people's advice about NOT USING TEFLON TAPE ON AN FITTINGS, I can only assume you bought your turbo off eBay and got something that's not a real Garrett ball bearing T28. __________________ SoSideway's iTrader Rating!! *SoSideways' Review Thread!!* http://sosideways.wordpress.com/

12-03-2008, 10:15 PM	#2
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	Did you put teflon tape on your AN water line connections?

12-03-2008, 10:26 PM	#6
memphiss13 Zilvia Member Join Date: Apr 2003 Location: Cordova, TN Age: 41 Posts: 287 Trader Rating: (0) Feedback Score: 0 reviews	ah nevermind i looked at the pic again not sure how you are going to make that one work. and yeah no teflon needed on an lines.