Head Unit Install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

scandalcat1 · 05-13-2003, 10:42 PM

You need to wire a constant memory directly from the battery to the yellow wire on the H/U. To be safe I would add a fuse inline like, say .5a. I drilled a hole through my firewall right behind the master cyclinder for my 4 guage power cable for my amps and the direct memory cable.

The antenna has the ground built into in. If you buy the adapter, you should be fine. From what you are telling me however, it sounds like you already have a ground somewhere. Just run the cable for the memory and the stereo will power up fine.

05-13-2003, 10:42 PM	#1
scandalcat1 Zilvia Member Join Date: Apr 2003 Location: Texas Age: 46 Posts: 160 Trader Rating: (0) Feedback Score: 0 reviews	Hey JSR20DET You need to wire a constant memory directly from the battery to the yellow wire on the H/U. To be safe I would add a fuse inline like, say .5a. I drilled a hole through my firewall right behind the master cyclinder for my 4 guage power cable for my amps and the direct memory cable. The antenna has the ground built into in. If you buy the adapter, you should be fine. From what you are telling me however, it sounds like you already have a ground somewhere. Just run the cable for the memory and the stereo will power up fine. __________________ Redline at over 6500 then drop the clutch, but to keep it on full boil use fast upshifts and smile big... -----------------------------------------