Anyone running the SPL Parts Big Brake rotor kit? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

redline racer510 · 12-12-2008, 09:47 AM

its about the thickness of 2 or 3 rotors stacked on top of each other. but im wondering if you can defeat this by running evo or sti rotors(13inch) ?

racer98 · 12-12-2008, 10:17 AM

Best bet is if you have some 18in rims use the new G37 calipers and rotors all around rears are a bolt and play with the z32 conversion - you will need a brake bias adjuster as well a upgrade the brake master.

if you dont want to go that route buy the z32 coversion f/r with brake master but go with a 2peice hat and floating rotors

good luck.

12-12-2008, 09:47 AM	#1
redline racer510 Zilvia FREAK! Join Date: Dec 2007 Location: EARFF(earth for you idiots) Posts: 1,072 Trader Rating: (1) Feedback Score: 1 reviews	its about the thickness of 2 or 3 rotors stacked on top of each other. but im wondering if you can defeat this by running evo or sti rotors(13inch) ?

12-12-2008, 10:17 AM	#2
racer98 Post Whore! Join Date: Jul 2003 Location: 六本木 Age: 47 Posts: 6,202 Trader Rating: (128) Feedback Score: 128 reviews	Best bet is if you have some 18in rims use the new G37 calipers and rotors all around rears are a bolt and play with the z32 conversion - you will need a brake bias adjuster as well a upgrade the brake master. if you dont want to go that route buy the z32 coversion f/r with brake master but go with a 2peice hat and floating rotors good luck.