Z32 turbo pistons in SR20DET - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

timtiminy · 01-05-2009, 07:53 AM

Alright so i sourced a set of low mileage used VG30DETT pistons, Dirt cheap and in great condition. I also found a guy who has a SR torque plate that is willing to let me use it to get my block overbored the 1mm needed. Machining cost are going to be the most expensive thing but i think after everthing is said and done I will have saved hundreds of dollars from going aftermarket pistons and only have spent a little bit more than if i would've had a good block to have started out with and was just doing a OEM rebuild. So basically I will have an 1mm overbore OEM rebuild when everything is said and done.

01-05-2009, 07:53 AM	#11
timtiminy Zilvia Addict Join Date: Feb 2006 Location: Socal Posts: 624 Trader Rating: (0) Feedback Score: 0 reviews	Alright so i sourced a set of low mileage used VG30DETT pistons, Dirt cheap and in great condition. I also found a guy who has a SR torque plate that is willing to let me use it to get my block overbored the 1mm needed. Machining cost are going to be the most expensive thing but i think after everthing is said and done I will have saved hundreds of dollars from going aftermarket pistons and only have spent a little bit more than if i would've had a good block to have started out with and was just doing a OEM rebuild. So basically I will have an 1mm overbore OEM rebuild when everything is said and done.