Shimming an R200 or J30 vlsd

[irax]

Originally Posted by SoSideways

When the clutches engaged?

I didn't think there were CLUTCHES in a VLSD?

so you're assuming he drives auto?

[SoSideways]

Originally Posted by irax

so you're assuming he drives auto?

What?

Unless he has a multiplate clutch assembly, I don't see how there could be "CLUTCHES" on a car, unless he was talking about the LSD clutches, which an VLSD do not have.

[Snoopy]

Originally Posted by SoSideways

What?

Unless he has a multiplate clutch assembly, I don't see how there could be "CLUTCHES" on a car, unless he was talking about the LSD clutches, which an VLSD do not have.

My mistake* To my understanding I thought a vlsd was a clutch type..

[SoSideways]

Originally Posted by Snoopy

My mistake* To my understanding I thought a vlsd was a clutch type..

No, if it was a clutch type people wouldn't be preloading it.

A VLSD is based on the viscous fluid dynamic to create a "drag" between the 2 halves inside the differential.

When 1 wheel starts to spin, the guts of the VLSD, more importantly the viscous fluid, will start to drag the other half along with it, creating a "differential" type effect, where both wheels are spinning.

A good example of this would be to take a glass of water, put some ice in it, and wet down the surface where the glass of water will sit on, and start spinning the glass. You should see the glass go first, then the ice will eventually start spinning along with the glass.

That motion is the same type of motion that happens inside a VLSD.

It has no clutch plates like the clutch type LSDs do.

Helical LSDs also do not have clutch plates. Helical LSDs are all gear based, no clutch plates.