Picture Request: Interior Guage Setups - Page 18 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Angelus · 01-22-2009, 05:28 PM

Quote:

Originally Posted by Neejay

They look like 60mm

Yes, you`re right.

Slammed180 · 01-22-2009, 06:19 PM

Quote:

Originally Posted by SRpetey

poeple with the regular center vent set up should get this. its from summit racing and it angles your gauges

I had that, but I've got something even better now.
muhahaha

Monooxide · 01-22-2009, 07:49 PM

Quote:

Originally Posted by sc300turbo

how much was this and any pics installed...i would LOVE that dash set up
would it work with an aem?

If you don't know what it is, you probably can't/won't buy it.

Quote:

Originally Posted by Dustxking

Looking good,

Where do you get the 3 hole vent pod gauge holder, ive look enjuku, optionimports, zilvia. ebay and cant find them anywhere.

Someone help!?!?

Ebay, Search "240sx gauge pod"

Geno750 · 01-23-2009, 01:02 PM

Here is mine.

Just waiting on a green led for the fuel gauge and I'll be done.

Monooxide · 01-23-2009, 01:06 PM

Quote:

Originally Posted by Geno750

Just waiting on a green led for the fuel gauge and I'll be done.

I like it, but how does it look in the day? How well did you block off the back that goes to the dash bar?

Defi?? Lol

Geno750 · 01-23-2009, 01:14 PM

Quote:

Originally Posted by Monooxide

I like it, but how does it look in the day? How well did you block off the back that goes to the dash bar?

The stock cluster is still there, just hollowed out (except for the working fuel gauge), so its blocked off pretty well i think.

DrtyRat · 01-23-2009, 03:04 PM

Quote:

Originally Posted by Monooxide

If you don't know what it is, you probably can't/won't buy it.

I'm sure Jeff could afford it w/o a problem, so save your "I can buy more expensive parts than you can!" speech for someone else.

It's a stack Jeff.

Volchok · 01-23-2009, 07:09 PM

Quote:

Originally Posted by Monooxide

I like it, but how does it look in the day? How well did you block off the back that goes to the dash bar?

Defi?? Lol

I like that a lot! very nice. I am considering something like that for tach, fuel gauge and a/f when I get rid of stock cluster. very well executed.

Quote:

Originally Posted by DrtyRat

I'm sure Jeff could afford it w/o a problem, so save your "I can buy more expensive parts than you can!" speech for someone else.

It's a stack Jeff.

Looks like a racepak, but i could be wrong. I really like the racpak myself, but it is pricy.

here is mine, I made the gauge pod for the ac vent along with the sides to angle toward the driver out of some sheet metal, instead of buying them on summit or whatever. I posted before it was in the car, looks a lot better in the car with the gauges in it. Also my new sbc i-color boost controller, man I love that thing!

ngibson · 01-24-2009, 08:06 AM

Working on finishing this up, need to shave the back down some so it clears the ac controller, but overall I'm happy with the outcome. Was a pain in the ass to build though.

ngibson · 01-25-2009, 07:21 AM

Also mounted my boost controller and turbo timer here

This was before the bezel was painted

Monooxide · 01-25-2009, 09:28 AM

Quote:

Originally Posted by DrtyRat

I'm sure Jeff could afford it w/o a problem, so save your "I can buy more expensive parts than you can!" speech for someone else.

It's a stack Jeff.

I can't afford a Stack, AIM or Racepack.

kuruptR · 01-25-2009, 04:39 PM

Finally got a chance to finish it off, I was waiting for a certain part to come in to complete it... But i didnt end up getting it so I just finished the cluster as is..

All I could want from my cluster, well maybe a boost gauge..

Wide band installed

LED Back Lit

Testing it out in a dark room, its okay... could be brighter, may take it a part to add a couple more LED's

I hope the wide band still works its been sitting in my room for months with out a shell..

ngibson · 01-25-2009, 05:20 PM

That looks awesome! Where did you get that speedo?

WhiteGLX · 01-25-2009, 09:30 PM

sc300turbo · 01-26-2009, 03:58 AM

Quote:

Originally Posted by Monooxide

If you don't know what it is, you probably can't/won't buy it.

not knowing what it is has nothing to do with being able to afford it.....thats a pretty stupid statement.....
i can afford it just fine thanks.....

some real nice set ups here...love the custom creativity......and love that stack....that just got logged into my future plans

C-unit · 01-26-2009, 04:44 AM

Real Nice stack set up there!! I was going to do the same thing but got the wrong measurement cluster..

Pm u sc300turbo if you are interested at the stack dash. need to sell it and get the right one!!

Om1kron · 01-26-2009, 10:02 AM

Quote:

Originally Posted by sc300turbo

how much was this and any pics installed...i would LOVE that dash set up
would it work with an aem?

That's a stack, and it doesn't plug into your ecu, it has it's own analog inputs for sensors as far as I know.

Pegasus - Stack ST8100 Custom Pre-Configured Dash Kit

ST8100

No good videos of one though.

The cheapest one seems to be the MyChron MXL Strada at 1000 bucks and some change.

Pegasus - MyChron MXL Strada High Performance Digital Dash

the racepak IQ3 is plug and play, you can add extra sensors to it for about 250 a pop. But out of the box it's ready to go, it measures your speed by gps (comes with gps sensor.)

Racepak Data Systems - Professional Motorsports Data Acquisition Systems

This is how my dash should look once I am done buying everything....

Here is the Defi Super Sports Cluster, with integrated boost gauge, I think this would be an ideal set up but fuck if anyone would know how to install it much less I am afraid to even know it's price tag.

and there ya have it.

Monooxide · 01-26-2009, 10:48 AM

Quote:

Originally Posted by Om1kron

The cheapest one seems to be the MyChron MXL Strada at 1000 bucks and some change.

Remember this is without Sensors. AIMs look really good for their price but then you're looking at 700-1500 in sensors...

Om1kron · 01-26-2009, 11:57 AM

Quote:

Originally Posted by Monooxide

Remember this is without Sensors. AIMs look really good for their price but then you're looking at 700-1500 in sensors...

Same deal with the racepak... it's like 1500 for the unit. But it's 250 a sensor, which seems ideal since it's like 250 for a gauge of the same function. boost, water temp, oil p, oil t, voltage, etc.

ngibson · 02-16-2009, 03:04 AM

Volchok · 02-17-2009, 09:56 AM

Here is an updated pic of my setup, with the new AEM wideband installed. I am going to switch the wideband face to black which matches better. I posted earlier, but was incomplete. Right now I am waiting on a new gauge cluster with led backlights and a carbon fiber face.

Quote:

Originally Posted by Om1kron

wow that is beautiful!!!! definitely have to go that route one day....

510-SR20DET · 02-19-2009, 07:17 PM

i have a question, I see alot people put gauges where the middle air vent at, Does that make the a gauges heat up w/ hot air? Isn't it gonna ruin the gauge?

skirodeo7 · 02-24-2009, 05:42 PM

where is everyone getting the 3 gauge vent mounts for the s13? Either everyone's fab skills are phenomenal or there is a place they can be picked up. anyone?

Volchok · 02-24-2009, 05:59 PM

Quote:

Originally Posted by 510-SR20DET

i have a question, I see alot people put gauges where the middle air vent at, Does that make the a gauges heat up w/ hot air? Isn't it gonna ruin the gauge?

I would say that 90% of the people, such as myself, that are using ac vent gauge pods do not have ac nor heat. All of my A/C and Heater components have been removed.

Quote:

Originally Posted by skirodeo7

where is everyone getting the 3 gauge vent mounts for the s13? Either everyone's fab skills are phenomenal or there is a place they can be picked up. anyone?

most people are making there on, as I posted earlier i made mine out of sheet metal using a hole saw, then sprayed it with a texture coating. It was extremely easy. They do sell them made out of CNC billet though and they are really nice, just more expensive.

skirodeo7 · 02-24-2009, 06:07 PM

Quote:

Originally Posted by Volchok

They do sell them made out of CNC billet though and they are really nice, just more expensive.

Do you know where to find them by chance?

undesiredshoe · 02-24-2009, 06:32 PM

Quote:

Originally Posted by skirodeo7

Do you know where to find them by chance?

On E bay bay, where, E bay bay.

Broadfield · 03-18-2009, 06:19 PM

dirtdiggler666 · 03-18-2009, 07:14 PM

this is mine i got everything for free becides the wideband

tach
fuel level
wideband
oil press
oiltemp
water temp
boost

all in the cluster

its all more flush and fits better now the backing plate was just sitting in their for this pic.

qt_240 · 03-19-2009, 01:07 AM

Quote:

Originally Posted by Geno750

Here is mine.

Just waiting on a green led for the fuel gauge and I'll be done.

Better pix please!

HungryHank · 03-19-2009, 03:35 AM

Quote:

Originally Posted by qt_240

Better pix please!

much agreeed.

01-25-2009, 09:30 PM	#524
WhiteGLX Zilvia Addict Join Date: Jan 2003 Location: Baltimore, MD Age: 41 Posts: 872 Trader Rating: (7) Feedback Score: 7 reviews	__________________ *NASA HPDE Instructor*

03-18-2009, 06:19 PM	#537
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 51 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	__________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds

03-18-2009, 07:14 PM	#538
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 45 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	this is mine i got everything for free becides the wideband tach fuel level wideband oil press oiltemp water temp boost all in the cluster its all more flush and fits better now the backing plate was just sitting in their for this pic. __________________

01-23-2009, 01:02 PM	#514
Geno750 Zilvia Junkie Join Date: Oct 2006 Location: Aurora, CO Age: 40 Posts: 375 Trader Rating: (13) Feedback Score: 13 reviews	Here is mine. Just waiting on a green led for the fuel gauge and I'll be done.

01-24-2009, 08:06 AM	#519
ngibson Zilvia Member Join Date: Dec 2007 Location: FL Age: 37 Posts: 150 Trader Rating: (5) Feedback Score: 5 reviews	Working on finishing this up, need to shave the back down some so it clears the ac controller, but overall I'm happy with the outcome. Was a pain in the ass to build though.

01-25-2009, 07:21 AM	#520
ngibson Zilvia Member Join Date: Dec 2007 Location: FL Age: 37 Posts: 150 Trader Rating: (5) Feedback Score: 5 reviews	Also mounted my boost controller and turbo timer here This was before the bezel was painted

01-25-2009, 04:39 PM	#522
kuruptR Zilvia FREAK! Join Date: Jan 2003 Location: UpNorth Posts: 1,046 Trader Rating: (1) Feedback Score: 1 reviews	Finally got a chance to finish it off, I was waiting for a certain part to come in to complete it... But i didnt end up getting it so I just finished the cluster as is.. All I could want from my cluster, well maybe a boost gauge.. Wide band installed LED Back Lit Testing it out in a dark room, its okay... could be brighter, may take it a part to add a couple more LED's I hope the wide band still works its been sitting in my room for months with out a shell..

01-25-2009, 05:20 PM	#523
ngibson Zilvia Member Join Date: Dec 2007 Location: FL Age: 37 Posts: 150 Trader Rating: (5) Feedback Score: 5 reviews	That looks awesome! Where did you get that speedo?

01-26-2009, 04:44 AM	#526
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Real Nice stack set up there!! I was going to do the same thing but got the wrong measurement cluster.. Pm u sc300turbo if you are interested at the stack dash. need to sell it and get the right one!!

02-16-2009, 03:04 AM	#530
ngibson Zilvia Member Join Date: Dec 2007 Location: FL Age: 37 Posts: 150 Trader Rating: (5) Feedback Score: 5 reviews

02-19-2009, 07:17 PM	#532
510-SR20DET Zilvia Junkie Join Date: May 2008 Location: Aye Bay Bay Posts: 418 Trader Rating: (9) Feedback Score: 9 reviews	i have a question, I see alot people put gauges where the middle air vent at, Does that make the a gauges heat up w/ hot air? Isn't it gonna ruin the gauge?

02-24-2009, 05:42 PM	#533
skirodeo7 Join Date: Mar 2008 Location: Bozeman, MT Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	where is everyone getting the 3 gauge vent mounts for the s13? Either everyone's fab skills are phenomenal or there is a place they can be picked up. anyone?