DID SOME UPGRADES.. now my car idles @ 1500 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DDDsquad_s13panda · 02-28-2009, 03:45 PM

:SR20DE: S13

Alright after 4-5 months my car have been down. i finally had some money to get it fix and also put some upgrades on.

255 WB fuelpump
Freddy intake manifold
Z32 TT fuel filter
370cc injectors with DET rails

I change my TB because my original one broke so i used a G20 TB which was about the same but i had to fabricate it so it sits right with the cable. And i also detach the TPS to do so.

Now my car idles @ 1500 warm.

I took off the cable from the TB thinking its just adj, but still idles @ 1500.

I also took off the TPS off of the TB itself but it still holds @ 1500.

What could be wrong??...

SOB!!!!!

kevtrinh · 02-28-2009, 03:50 PM

adjust your throttle body butterfly valve

DDDsquad_s13panda · 02-28-2009, 03:55 PM

What do u mean? that lil stopper screw? Because i took the cable off of the TB thinking it wasnt letting it close all the way. But it does or so i think so.

irritatedmax · 02-28-2009, 04:00 PM

check your timing? you might have adjusted the tps without realizing it.

this is procedure for ka's not sure if the sr differs.
KA-T.org - The Home of 1000+ whp/7 sec Turbo KA's

DDDsquad_s13panda · 02-28-2009, 04:24 PM

Quote:

Originally Posted by irritatedmax

check your timing? you might have adjusted the tps without realizing it.

this is procedure for ka's not sure if the sr differs.
KA-T.org - The Home of 1000+ whp/7 sec Turbo KA's

That be so easy if my stupid ass timing gun is working, but i broke it =[. Fucking aye.

Thanks for that info though.

opponheimer · 02-28-2009, 04:31 PM

adjust your IACV idle set screw. can't believe all these dumbass posts. you need to unplug your tps before you adjust it.

DDDsquad_s13panda · 02-28-2009, 04:37 PM

Quote:

Originally Posted by opponheimer

adjust your IACV idle set screw. can't believe all these dumbass posts. you need to unplug your tps before you adjust it.

Most reasonable answer. Thanks. Ima try that out right now!

DDDsquad_s13panda · 02-28-2009, 06:46 PM

Dang, iono how im suppose to do that but it still holds @ 1500rpm, i pretty much tightened it up all day, because when i was loosen it, the RPM was getting higher.

ill try and search for another method tomorrow.

mxexux · 02-28-2009, 07:00 PM

Quote:

Originally Posted by DDDsquad_s13panda

That be so easy if my stupid ass timing gun is working, but i broke it =[. Fucking aye.

Thanks for that info though.

I think he means to check the throttle timing which is what nissan calls it when you adjust where the TPS sensor reads WOT and closed throttle. The manual has the procedure to follow.

opponheimer · 02-28-2009, 08:01 PM

this should be your FSM, look for mxexux's procedure he speaks of

http://www.nicoclub.com/FSM/240sx/180SX_SR20DET.pdf

sorry but its all in japanese

DDDsquad_s13panda · 02-28-2009, 11:30 PM

=/ oh man.

DDDsquad_s13panda · 03-01-2009, 02:21 PM

no more other inputs on these?

ESone3 · 03-01-2009, 04:25 PM

sounds like vacume leak or TPS adjustment, or it might be broken.

DDDsquad_s13panda · 03-01-2009, 04:38 PM

vacuum leak?. wont the car shut down with a vacuum leak?

ESone3 · 03-01-2009, 05:17 PM

nope

check all your vacume lines and all ports on the intake manifold

DDDsquad_s13panda · 03-01-2009, 08:23 PM

??? hmm damn. oright ill give it a look thanks.

02-28-2009, 03:45 PM	#1
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	DID SOME UPGRADES.. now my car idles @ 1500 :SR20DE: S13 Alright after 4-5 months my car have been down. i finally had some money to get it fix and also put some upgrades on. 255 WB fuelpump Freddy intake manifold Z32 TT fuel filter 370cc injectors with DET rails I change my TB because my original one broke so i used a G20 TB which was about the same but i had to fabricate it so it sits right with the cable. And i also detach the TPS to do so. Now my car idles @ 1500 warm. I took off the cable from the TB thinking its just adj, but still idles @ 1500. I also took off the TPS off of the TB itself but it still holds @ 1500. What could be wrong??... SOB!!!!!

02-28-2009, 03:50 PM	#2
kevtrinh Zilvia Junkie Join Date: May 2006 Location: Richmond,VA Posts: 370 Trader Rating: (0) Feedback Score: 0 reviews	adjust your throttle body butterfly valve __________________ Team Pterodactyl

03-01-2009, 04:25 PM	#13
ESone3 Zilvia.net Advertiser Join Date: Oct 2005 Location: Chicago Posts: 1,376 Trader Rating: (15) Feedback Score: 15 reviews	sounds like vacume leak or TPS adjustment, or it might be broken. __________________ www.illgarage.com

03-01-2009, 05:17 PM	#15
ESone3 Zilvia.net Advertiser Join Date: Oct 2005 Location: Chicago Posts: 1,376 Trader Rating: (15) Feedback Score: 15 reviews	nope check all your vacume lines and all ports on the intake manifold __________________ www.illgarage.com

02-28-2009, 03:55 PM	#3
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	What do u mean? that lil stopper screw? Because i took the cable off of the TB thinking it wasnt letting it close all the way. But it does or so i think so.

02-28-2009, 04:00 PM	#4
irritatedmax Zilvia FREAK! Join Date: Sep 2005 Location: Ashland, NE Age: 39 Posts: 1,359 Trader Rating: (20) Feedback Score: 20 reviews	check your timing? you might have adjusted the tps without realizing it. this is procedure for ka's not sure if the sr differs. KA-T.org - The Home of 1000+ whp/7 sec Turbo KA's

02-28-2009, 04:31 PM	#6
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	adjust your IACV idle set screw. can't believe all these dumbass posts. you need to unplug your tps before you adjust it.

02-28-2009, 06:46 PM	#8
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	Dang, iono how im suppose to do that but it still holds @ 1500rpm, i pretty much tightened it up all day, because when i was loosen it, the RPM was getting higher. ill try and search for another method tomorrow.

02-28-2009, 08:01 PM	#10
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3) Feedback Score: 3 reviews	this should be your FSM, look for mxexux's procedure he speaks of http://www.nicoclub.com/FSM/240sx/180SX_SR20DET.pdf sorry but its all in japanese

02-28-2009, 11:30 PM	#11
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	=/ oh man.

03-01-2009, 02:21 PM	#12
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	no more other inputs on these?

03-01-2009, 04:38 PM	#14
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	vacuum leak?. wont the car shut down with a vacuum leak?

03-01-2009, 08:23 PM	#16
DDDsquad_s13panda BANNED Join Date: Dec 2007 Location: Fontana, IE. Age: 38 Posts: 550 Trader Rating: (7) Feedback Score: 7 reviews	??? hmm damn. oright ill give it a look thanks.