clutch not engaging on s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

teamsprock · 04-13-2009, 09:16 AM

IT really doesn't matter what engine it is but I am not talking about the slave cylinder, I am saying the clutch fork should move freely. Simalar to what was said about the fork coming off the TOB but if the TOB is pressed hard and/or the pressure plate is weak it can move too far forward and it will not freely move back as there is a lip on the input shaft.

But as John said with the amount of time this post has taken you could have pulled the tranny already. Seems like you don't like anyone's suggestions anyway.

04-13-2009, 09:16 AM	#1
teamsprock Zilvia Addict Join Date: Sep 2006 Location: Billings Age: 42 Posts: 636 Trader Rating: (8) Feedback Score: 8 reviews	IT really doesn't matter what engine it is but I am not talking about the slave cylinder, I am saying the clutch fork should move freely. Simalar to what was said about the fork coming off the TOB but if the TOB is pressed hard and/or the pressure plate is weak it can move too far forward and it will not freely move back as there is a lip on the input shaft. But as John said with the amount of time this post has taken you could have pulled the tranny already. Seems like you don't like anyone's suggestions anyway.