s13 tranny in a s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

zstylelowrider · 04-28-2009, 01:40 PM

So i got a 91 s13 5 speed tranny from a friend and by looking at it I can tell that the bell housing doesn't have the hole for the crank sensor. So my question is can i take the bell housing off of my auto and bolt it to the 5 speed so I can bang gears in this thing. Btw my car is a 95 s14.

HungryHank · 04-28-2009, 01:49 PM

try it!

impact gun and a couple minutes should find your solution

sunnys14 · 04-28-2009, 01:50 PM

Drill a hole and put the sensor in.

Thats what I did.

zstylelowrider · 04-28-2009, 02:52 PM

What about your speed sensor?

projectRDM · 04-28-2009, 06:52 PM

You cannot put an auto bellhousing on a manual transmission. If you bothered to look at it you'd know that.

VSS plugs right in to any 89-98 transmission.

GSXRJJordan · 04-28-2009, 06:56 PM

Quote:

Originally Posted by projectRDM

You cannot put an auto bellhousing on a manual transmission. If you bothered to look at it you'd know that.

VSS plugs right in to any 89-98 transmission.

Exactly right again, Father Russ.

Drill the hole - it doesn't need to be exact, just close enough.

*Jonnie Fraz* · 04-28-2009, 07:29 PM

Make sure that the crank sensor does not hit the flywheel. We had to put a small shim under the sensor and then had no problems.

04-28-2009, 01:40 PM	#1
zstylelowrider Join Date: Apr 2009 Location: Missouri Age: 44 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	s13 tranny in a s14 So i got a 91 s13 5 speed tranny from a friend and by looking at it I can tell that the bell housing doesn't have the hole for the crank sensor. So my question is can i take the bell housing off of my auto and bolt it to the 5 speed so I can bang gears in this thing. Btw my car is a 95 s14.

04-28-2009, 06:52 PM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 50 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You cannot put an auto bellhousing on a manual transmission. If you bothered to look at it you'd know that. VSS plugs right in to any 89-98 transmission. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

04-28-2009, 07:29 PM	#7
Jonnie Fraz Premium Member Join Date: Jan 2005 Location: Cali Age: 56 Posts: 1,371 Trader Rating: (29) Rides Gallery: Jonnie Fraz Feedback Score: 29 reviews	Make sure that the crank sensor does not hit the flywheel. We had to put a small shim under the sensor and then had no problems. __________________ Stealth-Custom-Fab.com

04-28-2009, 01:49 PM	#2
HungryHank BANNED Join Date: Feb 2009 Location: 123klan - Southern California Baby Killer Gang Posts: 708 Trader Rating: (12) Feedback Score: 12 reviews	try it! impact gun and a couple minutes should find your solution

04-28-2009, 01:50 PM	#3
sunnys14 Zilvia FREAK! Join Date: Mar 2006 Location: a land far far away... Posts: 1,549 Trader Rating: (19) Feedback Score: 19 reviews	Drill a hole and put the sensor in. Thats what I did.

04-28-2009, 02:52 PM	#4
zstylelowrider Join Date: Apr 2009 Location: Missouri Age: 44 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	What about your speed sensor?