Carbon Fiber Hatch

[curry.style]

^+1 This is very true, especially considering how easy it is to absolutely destroy the glass just trying to get it out.

[supreme_1]

if you have to ask this question, dont even attempt to take it out. take it to a glass shop and have them do it

[cuong_vo06]

Originally Posted by supreme_1

if you have to ask this question, dont even attempt to take it out. take it to a glass shop and have them do it

so you're saying that for asking question i shouldnt do it, well dont everyone has question about everything. what sense would it make not to ask questions to be sure and all. at least everyone else gave me the advice to go to a shop and i took it. i was only trying to see if it was possible and if it were save money. if not then okay. ill take it somewhere else.

[supreme_1]

Originally Posted by cuong_vo06

so you're saying that for asking question i shouldnt do it, well dont everyone has question about everything. what sense would it make not to ask questions to be sure and all. at least everyone else gave me the advice to go to a shop and i took it. i was only trying to see if it was possible and if it were save money. if not then okay. ill take it somewhere else.

I did give you advice and i also told you to take it to a glass shop. Please correct the grammatical errors and improper use of terms so i can distinguish whether or not you are trying to argue with me or make a point that you are broke.

If by all means you do want to try and take the glass out for your self, go and pick up a heat gun, wire leader, a needle, and a screwdriver. Start by taking off the surrounding trims from the plastic clips (if it was already taken off previously it may be siliconed on.) Once that is done carefully take those clips off while trying not to break them. Once you have done that heat the portion of the adhesive where you are trying to puncture with the wire leader and a needle. Once that is done, slowly go around the window with the wire leader. Make sure you heat ahead of where you will be cutting. Go around the entire window, and in no time flat you should get it off.

Originally Posted by supreme_1

I did give you advice and i also told you to take it to a glass shop. Please correct the grammatical errors and improper use of terms so i can distinguish whether or not you are trying to argue with me or make a point that you are broke.

If by all means you do want to try and take the glass out for your self, go and pick up a heat gun, wire leader, a needle, and a screwdriver. Start by taking off the surrounding trims from the plastic clips (if it was already taken off previously it may be siliconed on.) Once that is done carefully take those clips off while trying not to break them. Once you have done that heat the portion of the adhesive where you are trying to puncture with the wire leader and a needle. Once that is done, slowly go around the window with the wire leader. Make sure you heat ahead of where you will be cutting. Go around the entire window, and in no time flat you should get it off.

Glass guys dont use heat guns, because they dont use adhesive that is effected by heat. They dont use silicone (which you mentioned), but even if silicone was used.. you do realize that silicon can endure some serious temps.

Window guys use URETHANE adhesive, which is not effected much by temperature either.

[cuong_vo06]

Originally Posted by supreme_1

I did give you advice and i also told you to take it to a glass shop. Please correct the grammatical errors and improper use of terms so i can distinguish whether or not you are trying to argue with me or make a point that you are broke.

If by all means you do want to try and take the glass out for your self, go and pick up a heat gun, wire leader, a needle, and a screwdriver. Start by taking off the surrounding trims from the plastic clips (if it was already taken off previously it may be siliconed on.) Once that is done carefully take those clips off while trying not to break them. Once you have done that heat the portion of the adhesive where you are trying to puncture with the wire leader and a needle. Once that is done, slowly go around the window with the wire leader. Make sure you heat ahead of where you will be cutting. Go around the entire window, and in no time flat you should get it off.

Thanks for your advice and telling me my grammers are wrong. and financially i dont make that much money so if there is an opportunity to save money i would love to take it. Everyone works hard for their money so i thought people would understand if i want to save a bit of cash. Apparently you are well off and dont have to worry about it. since its not possible for me to do it ill get it done by a pro like you suggested. thank you.