Brembo Calipers on S13

[DreamN]

::sigh::.... get the same rotors off the spec-v with the brembo package. You can use your stock 240SX lines. Should all be a plug and play.


Honestly, searching isn't that hard. Don't limit yourself to one source either.

[drift freaq]

Originally Posted by DreamN

::sigh::.... get the same rotors off the spec-v with the brembo package. You can use your stock 240SX lines. Should all be a plug and play.


Honestly, searching isn't that hard. Don't limit yourself to one source either.

Well, Jimmy pretty much says, what I was going to say. The Spec V rotors are not 11 inch. Z32 rotors are 11 inch!

The Spec V Brembo package rotors are 12 inch, and they are 22mm thick. The way to go is to get Rotors for the Spec V Brembo package. If you are 5 lug have them redrilled for 5 lug. You use your stock 240 lines for the caliper or get steel braided lines for a stock 240sx setup and they will bolt on.