Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 05-26-2009, 01:25 PM   #1
smelly240
Nissanaholic!
 
smelly240's Avatar
 
Join Date: Oct 2006
Location: Philaburbia
Age: 47
Posts: 2,137
Trader Rating: (4)
smelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfectionsmelly240 is close to perfection
Feedback Score: 4 reviews
Code 34 cannot be thrown for the engine knocking.

Its for a malfunctioning sensor/bad wiring.

just thought you should know.
__________________

HREs on a S13 - check, 6262 - check, Girlfriend.... - nope
smelly240 is offline   Reply With Quote
Sponsored Links
Old 05-26-2009, 02:15 PM   #2
s13pignose
Zilvia FREAK!
 
Join Date: Dec 2005
Location: ??
Posts: 1,324
Trader Rating: (2)
s13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of lights13pignose is a glorious beacon of light
Feedback Score: 2 reviews
OKAY I FINALLY HAVE A BREAK THROUGH...SOMETHING to work with

Yeah I type in all caps..cause I'm excited I have pinpointed something definitely wrong.

Okay there's part of the wiring harness wrapped up in wire loom..bigger than the type used to wrap the wires near the front of the motor. It's past the last fuel injector closest to the fire wall. Prior to pinpointing this area, I went out side took the cover off my fuel pump to jiggle wires nothing.. jiggled sub harness to knock sensor...nothing. All I had to do was touch the part of the harness in the big loom mentioned above..and the car cut off INSTANTLY! It never fails..did it 3 times. The lighter u touch it..it almost dies but not quite. So I think this is why I hit a bump or anything that would cause it to move..I get that jerk. Had my dad to tap it while I watch the tach..sure enough the car almost dies..tach needle drops..and relay near ecu clicks.

I'm suppose to have a guy that's good at car electrical look at it thursday..but if it's left all on me, at least I got an area to work with. Don't know what's going on inside till I open..which I wouldn't want to anyway cause been off and on raining to day.

Try and find a pic under the hood off a ka s14..and circle the area in ms paint and post
s13pignose is offline   Reply With Quote
Old 05-26-2009, 02:25 PM   #3
Om1kron
Post Whore!
 
Om1kron's Avatar
 
Join Date: Sep 2004
Location: Granada Hills, CA
Age: 44
Posts: 6,992
Trader Rating: (15)
Om1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfectionOm1kron is close to perfection
Feedback Score: 15 reviews
Quote:
Originally Posted by smelly240 View Post
Code 34 cannot be thrown for the engine knocking.

Its for a malfunctioning sensor/bad wiring.

just thought you should know.
And most of the time the sensors(knock) will throw a code if not tq'ed down properly as well. Hence why i'm just going to throw an ohm resistor on mine and call it a day.
__________________
Wayne Edwards
https://om1kron.blogspot.com
Om1kron is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net