** drag zilvians chime in**

[S@nt0s]

[Dee]

Originally Posted by S@nt0s

Hey I saw you at the track a few weeks back @ irwindale. I was in the silver s13 hatch on Volk mesh, what were you running in the coupe never got a chance to watch your run?


My best time there was 9.1@80mph(t25 sr20 @ 15psi ARC SMIC) but I kind of wish there were a road track around here because I would much rather run my car on some time attacks, Drag gets boring.

[undesiredshoe]

I ran a 12.8 @ 113mph on a stock block sohc:wiggl e:

[s13dan]

Originally Posted by undesiredshoe

I ran a 12.8 @ 113mph on a stock block sohc:wiggl e:

i have heard of this. It took a bottle and some really good 60 foots if im thinking of the same car..

[undesiredshoe]

Originally Posted by s13dan

i have heard of this. It took a bottle and some really good 60 foots if im thinking of the same car..

Nope, no bottle and a bad 60'....just pure boostage and e85. I think i am the fastest stock block sohc in the world! lol....maybe not but at least from what i can find.

Heres a time slip



Setup consists of turbonetics t3/t4 50 trim at 18 psi, stock block, headgasket, headstuds, cam, etc, 186k miles, a lot of ebay parts, and some drag radials.

From the traps, im probably capable of low 12's.

[Dee]

Originally Posted by undesiredshoe

Nope, no bottle and a bad 60'....just pure boostage and e85. I think i am the fastest stock block sohc in the world! lol....maybe not but at least from what i can find.

Heres a time slip



Setup consists of turbonetics t3/t4 50 trim at 18 psi, stock block, headgasket, headstuds, cam, etc, 186k miles, a lot of ebay parts, and some drag radials.

From the traps, im probably capable of low 12's.

impressive!

[VQMaxFan]

So anyone know if or anything about getting a spool for our rear ends? I remember reading on FA a guy posted saying he had a spool but it was the only one he knew of for an r200 and didnt post anymore about it.

Originally Posted by Dee

My best time there was 9.1@80mph(t25 sr20 @ 15psi ARC SMIC) but I kind of wish there were a road track around here because I would much rather run my car on some time attacks, Drag gets boring.

hrm both me and my friends cars were in the mid 8's with mostly stock SR's and 9psi, do you remember what kind of 60' you were cutting?

[Dee]

Originally Posted by VQMaxFan

hrm both me and my friends cars were in the mid 8's with mostly stock SR's and 9psi, do you remember what kind of 60' you were cutting?

crap mid 8's?! my 60' was 2.059 on that run, I've been having this problem with wheel hop every time I go so i'm not very consistent; most of the time my 60's are 2.3

[S@nt0s]

Originally Posted by VQMaxFan

So anyone know if or anything about getting a spool for our rear ends? I remember reading on FA a guy posted saying he had a spool but it was the only one he knew of for an r200 and didnt post anymore about it.

just weld the diff same thing but when asked say its a spool...

[Nismoknightska-t]

Originally Posted by Dee

crap mid 8's?! my 60' was 2.059 on that run, I've been having this problem with wheel hop every time I go so i'm not very consistent; most of the time my 60's are 2.3

If you have coilovers put them on full soft and they might help.. or put on some stock struts and springs and I can almost guarantee that the wheel up will stop..

[Nismo11]

Originally Posted by S@nt0s

Yea this car is freaking fast!