Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-30-2009, 01:31 PM   #1
alesserfate
Zilvia Member
 
Join Date: Oct 2007
Location: Ontario
Posts: 180
Trader Rating: (2)
alesserfate is an unknown quantity at this point
Feedback Score: 2 reviews
anyway back to this again, motor is running again, last night i sucessfully adjusted all the settings and it was idling properly and pulling hard steady at 11.0AFR at 12psi all the way to redline

however after increasing boost to 15psi and compensating fuel for it, it would start to rev limit at 5000-6000rpm again

i've checked that its not running too rich or too lean, i've also checked the ignition timing multiple times and cranked and its still what it was before, 7 degrees instead of 15 (just to be safe)

at the end of the day i turned the boost back down to 12psi and i can't get it to stop rev limiting there

also thought about decreasing BKR7E spark plug gap from 0.028 to 0.026

if anyone has any ideas why an ecu would rev limit early (besides too rich/too lean) please post up

thanks in advance!
__________________

alesserfate is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net