Godspeed Power GB Page!! Turbo,Exhaust,Down Pipe,turbo manifold and MORE!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Fatboy Garage · 07-20-2009, 12:24 PM

Godspeed Power Parts Group Buy!

Everything in stock and READY to SHIP AND PICK UP!!!

Turbo is the BEST!!

Nissan 240SX 89-90 KA24 (S13) Single Cam (KA24E) T3T4 Complete Turbo Kit

-T3T4 Turbo Charger .63ar
-KA24E Stainless Top Mount Manifold
-Aluminum Pre-Bent intercooler Pipe, With Clampes & Silicone
-3" Staninless Turbo Uppipe
-3"Stainles Turbo Downpipe
-Godspeed 38 Wastegate (7PSI)
-Oil Feel Line, Oil Return Line With All Fittings
-Type RS Blow Off Valve

NISSAN 240SX 91-94 KA24 (KA24DE) DUAL CAM MOTOR T3T4 COMPLETE TURBO CHARGER KIT

-T3T4 Turbo Charger .63ar
-KA24DE Stainless Top Mount Manifold
-Aluminum Pre-Bent intercooler Pipe, With Clampes & Silicone
-3" Staninless Turbo Uppipe
-3"Stainles Turbo Downpipe
-Godspeed 38 Wastegate (7PSI)
-Oil Feel Line, Oil Return Line With All Fittings
-Type RS Blow Off Valve

TD04-H T25 TURBO CHARGER

Turbo spec.

Intake in: 37.8 ex: 59.7

Exhaust in: 45.47 ex: 52.9

Internal Wastegate Set at 8PSI

Start Spooling At 2500RPM

GODSPEED 38MM GT-SERIES 38MM WASTEGATE (universal)

- comes with 7psi waste gate spring ( fully adjustable )
- dual port. accurate boost
- ultra durable diagram (diaphram)
- comes with all the hardware (bolts, gasket etc)
- accurate boost pressure
- high quality appearance
- 1 year warranty ( if installed by professional)
- comes with additional 11 psi, 15 psi springs

this wastegate is only 4.35" tall. very compact especially good for customer working with small / tight engine compartment.

GODSPEED GT-SERIES 44 MM V BAND DUAL SPRING WASTEGATE (universal)

-comes with 15psi waste gate spring ( fully adjustable from 10- 15 psi ) and extra 14psi spring ( if you add both spring that makes it 29 psi total )
-accurate boost pressure , prevent over boosting.
-high quality aluminum die-cast body
-ultra durable high temperature diaphragm
-comes with all the hardware ( v band, clamps and etc)
-stainless steel valve
-high quality appearance.
-1 year warranty ( if installed by professional)

GODSPEED GT-SERIES 50 MM V BAND DUAL SPRING WASTEGATE (universal)

-comes with 20psi waste gate spring ( fully adjustable from 15-20 psi ) and extra 7.5 psi spring ( if you add both spring that makes it around 27 psi total )
-accurate boost pressure
-ultra durable diagram (diaphram)
-comes with all the hardware ( v band, clamps and etc)
-high quality appearance.
-1 year warranty ( if installed by professional)

GODSPEED GT-SERIES 60 MM V BAND DUAL SPRING WASTEGATE (universal)

-comes with 24psi waste gate spring ( fully adjustable from 15-24 psi ) and extra 7.5 psi spring ( if you add both spring that makes it around 30 psi total )
-accurate boost pressure , prevent over boosting.
-high quality aluminum die-cast body
-ultra durable high temperature diaphragm
-comes with all the hardware ( v band, clamps and etc)
-stainless steel valve
-high quality appearance.
-1 year warranty ( if installed by professional)

Nissan S13 SR20DET Intake Manifold
Three Style available Cast, Polished, Chromed

Cast

Polished

Chromed

S13 S14 240SX Top Mount T3 Turbo Manifold ( sr20det motor )

- T3 Turbo Flange. FIT T3 AND T3T4 HYBRID TURBO
- 35MM or 38MM external wastegate flange
- SUS321 stainless steel

S13 S14 240SX SR20DET T3 Top Mount Cast Turbo Manifold

- extremely strong casting
- fits sr20det motor (s13, s14 ,s15)
- 38mm wastegate flange ( will fit 35mm or 38mm wastegate)
- t3 flange. fit all t3 or t3t4 hybrid turbo
- life time warranty

SR20 TOP MOUNT MANIFOLD + 3" STAINLESS DOWNPIPE + WASTEGATE DUMP TUBE

-FITS : TOP MOUNT T3 OR T3T4 TURBO CHARGER
-extremely strong stainless steel
-equal length for quick throttle response
-3" 5 bolt standard flange turbo downpipe
-T3 turbo flange
-38mm wastegate flange
-able to retain A/C power steering
-fully TIG welded
-Fully ported and polished
-includes all gaskets
-1 year warranty

S13 S14 240SX top mount t3 turbo manifold ( KA24DE motor )

- T3 Turbo Flange
- 35MM or 38MM external wastegate flange
- SUS321 stainless steel
- Fully TIG welded
- Fully Ported and Polished
- Includes bolts and gaskets

KA24DE(dual cam) T3 or T3T4 or T4 Top or Bottom Mount Cast Turbo Manifold

- 91-94, 95-98 Nissan 240sx KA24DE (Dual Cam)
- 93-01 Nissan Altima
- Extremely Strong Casting
- 35MM or 38MM External Wastegate Flange
- T3 or T4 Flange
- life time warranty

Nissan 180SX (CA18DET Only) T25 Bottom Mount Turbo Manifold

Nissan S13 S14 KA24DE(Duel Cam Only) T25 Bottom Mount Turbo Manifold

Nissan S13 S14 SR20DET T25 Bottom Mount Turbo Manifold

Nissan S13 S14 SR20DET Turbo Downpipe

Nissan S13 89-94 & S14 95-98 SR20DET Catback Exhaust

Nissan S13 89-94 SR20DET Carbon Catback Exhaust

Nissan S13 & S14 SR20DET Fuel Rail

Nissan S13 SR20DET Engine Damper

For RB25 Swap!!
RB25 Intake Manifold
Three Style Available Cast, Polished , Chromed

Cast

Polished

Chromed

RB25 Fuel Rail
Fit 10.5 to 11 mm feed injectors

PM US or CALL US For Better Pricing!!!
Let Us Know You are From Zilvia.net for Best Discount!!!!

We are S13/S14 Specialist, if you cant find what you need check out our website GodSpeed Project - Intercooler, Turbo Kits, Turbo Manifold, Body Kit or give us a call if you have any question!!

We also have other GB on the forum, so please check them out!!!

Ken @ Fatboy Garage Motorsport
11135 Rush St Unit B
South El Monte CA 91733
626-442-3988

Grenade180sx · 07-24-2009, 03:10 PM

i need a catback exhaust for s13. something similar to the megan type 2. u got anything?

stunnaben · 07-24-2009, 03:27 PM

best price on a s14 exhaust shipped to 27603

Fatboy Garage · 07-28-2009, 10:06 AM

Quote:

Originally Posted by Grenade180sx

i need a catback exhaust for s13. something similar to the megan type 2. u got anything?

Sorry we dont

Thanks

Ken,S

florante rea · 07-30-2009, 12:48 PM

any warranty on sr topmount manifold?

wisdom01 · 07-30-2009, 04:20 PM

how much for the ka24de turbo kit shipped to 96816?

Fatboy Garage · 07-30-2009, 04:54 PM

Quote:

Originally Posted by florante rea

any warranty on sr topmount manifold?

Cast are life time warranty

Thanks

Ken,S

florante rea · 07-30-2009, 07:31 PM

sorry i was referring to the tubular top mount mani, not the cast.

s14tan · 08-01-2009, 12:49 AM

Pics of the cast mani mounted with turbo to see MBC clearance?

Fatboy Garage · 08-03-2009, 10:24 AM

Quote:

Originally Posted by s14tan

Pics of the cast mani mounted with turbo to see MBC clearance?

yea will clear

Thanks

Ken,S

allntrlundrgrnd · 08-04-2009, 10:47 AM

single slammer turbo kit to 21146

lewisfk · 08-04-2009, 12:14 PM

were the hell is your products made? how much research and development goes into your products? godspeed!!!

allntrlundrgrnd · 08-04-2009, 01:53 PM

who makes the turbo?

Fatboy Garage · 08-04-2009, 04:17 PM

they are made by godspeed

burninskulls0911 · 08-04-2009, 04:21 PM

polished s13 sr intake mani

shmiddy · 08-05-2009, 01:10 PM

im looking for a top mount manifold... which do you recomend???? log or tubular?? pm me the price. i need a good STRONG ONE PLEASE LMK ASAP

Fatboy Garage · 08-06-2009, 01:38 PM

Check out our site

GodSpeed Project - Intercooler, Turbo Kits, Turbo Manifold, Body Kit

kbui · 08-10-2009, 07:49 PM

so what's the zilvia special pricing for the sr cast manifold?

FusionR240sx · 08-17-2009, 10:49 AM

price for sr downpipe shipped to 60018

pondmotorz · 08-22-2009, 10:18 PM

Price on SR downpipe and engine damper picked up

d0pe240 · 08-23-2009, 07:03 PM

how much for the exhaust shipped to 28209?

Fatboy Garage · 08-24-2009, 03:11 PM

ALL Pm Replied

Fatboy Garage · 08-24-2009, 06:18 PM

Bump Bump Bump

we have End of the month special

Please PM for pricing

Fatboy Garage · 08-25-2009, 06:52 PM

Bump Bump Bump

d0pe240 · 08-25-2009, 07:26 PM

does the exhaust hang low to the ground?

Fatboy Garage · 08-26-2009, 11:43 AM

Quote:

Originally Posted by d0pe240

does the exhaust hang low to the ground?

Nope is look like stock height

pondmotorz · 08-26-2009, 01:03 PM

cat back shipped to 91402 please

Syncade · 08-26-2009, 10:02 PM

RB25 intake mani prices for all three shipped to 16057 please

FusionR240sx · 08-30-2009, 10:54 PM

ka24de s13 turbo kit shipped to 60018

Fatboy Garage · 08-31-2009, 10:37 AM

Bump Bump All Pm Replied

Thanks

Ken,S

07-20-2009, 12:24 PM	#1
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Godspeed Power GB Page!! Turbo,Exhaust,Down Pipe,turbo manifold and MORE!!! Godspeed Power Parts Group Buy! Everything in stock and READY to SHIP AND PICK UP!!! Turbo is the BEST!! Nissan 240SX 89-90 KA24 (S13) Single Cam (KA24E) T3T4 Complete Turbo Kit -T3T4 Turbo Charger .63ar -KA24E Stainless Top Mount Manifold -Aluminum Pre-Bent intercooler Pipe, With Clampes & Silicone -3" Staninless Turbo Uppipe -3"Stainles Turbo Downpipe -Godspeed 38 Wastegate (7PSI) -Oil Feel Line, Oil Return Line With All Fittings -Type RS Blow Off Valve NISSAN 240SX 91-94 KA24 (KA24DE) DUAL CAM MOTOR T3T4 COMPLETE TURBO CHARGER KIT -T3T4 Turbo Charger .63ar -KA24DE Stainless Top Mount Manifold -Aluminum Pre-Bent intercooler Pipe, With Clampes & Silicone -3" Staninless Turbo Uppipe -3"Stainles Turbo Downpipe -Godspeed 38 Wastegate (7PSI) -Oil Feel Line, Oil Return Line With All Fittings -Type RS Blow Off Valve TD04-H T25 TURBO CHARGER Turbo spec. Intake in: 37.8 ex: 59.7 Exhaust in: 45.47 ex: 52.9 Internal Wastegate Set at 8PSI Start Spooling At 2500RPM GODSPEED 38MM GT-SERIES 38MM WASTEGATE (universal) - comes with 7psi waste gate spring ( fully adjustable ) - dual port. accurate boost - ultra durable diagram (diaphram) - comes with all the hardware (bolts, gasket etc) - accurate boost pressure - high quality appearance - 1 year warranty ( if installed by professional) - comes with additional 11 psi, 15 psi springs this wastegate is only 4.35" tall. very compact especially good for customer working with small / tight engine compartment. GODSPEED GT-SERIES 44 MM V BAND DUAL SPRING WASTEGATE (universal) -comes with 15psi waste gate spring ( fully adjustable from 10- 15 psi ) and extra 14psi spring ( if you add both spring that makes it 29 psi total ) -accurate boost pressure , prevent over boosting. -high quality aluminum die-cast body -ultra durable high temperature diaphragm -comes with all the hardware ( v band, clamps and etc) -stainless steel valve -high quality appearance. -1 year warranty ( if installed by professional) GODSPEED GT-SERIES 50 MM V BAND DUAL SPRING WASTEGATE (universal) -comes with 20psi waste gate spring ( fully adjustable from 15-20 psi ) and extra 7.5 psi spring ( if you add both spring that makes it around 27 psi total ) -accurate boost pressure -ultra durable diagram (diaphram) -comes with all the hardware ( v band, clamps and etc) -high quality appearance. -1 year warranty ( if installed by professional) GODSPEED GT-SERIES 60 MM V BAND DUAL SPRING WASTEGATE (universal) -comes with 24psi waste gate spring ( fully adjustable from 15-24 psi ) and extra 7.5 psi spring ( if you add both spring that makes it around 30 psi total ) -accurate boost pressure , prevent over boosting. -high quality aluminum die-cast body -ultra durable high temperature diaphragm -comes with all the hardware ( v band, clamps and etc) -stainless steel valve -high quality appearance. -1 year warranty ( if installed by professional) Nissan S13 SR20DET Intake Manifold Three Style available Cast, Polished, Chromed Cast Polished Chromed S13 S14 240SX Top Mount T3 Turbo Manifold ( sr20det motor ) - T3 Turbo Flange. FIT T3 AND T3T4 HYBRID TURBO - 35MM or 38MM external wastegate flange - SUS321 stainless steel S13 S14 240SX SR20DET T3 Top Mount Cast Turbo Manifold - extremely strong casting - fits sr20det motor (s13, s14 ,s15) - 38mm wastegate flange ( will fit 35mm or 38mm wastegate) - t3 flange. fit all t3 or t3t4 hybrid turbo - life time warranty SR20 TOP MOUNT MANIFOLD + 3" STAINLESS DOWNPIPE + WASTEGATE DUMP TUBE -FITS : TOP MOUNT T3 OR T3T4 TURBO CHARGER -extremely strong stainless steel -equal length for quick throttle response -3" 5 bolt standard flange turbo downpipe -T3 turbo flange -38mm wastegate flange -able to retain A/C power steering -fully TIG welded -Fully ported and polished -includes all gaskets -1 year warranty S13 S14 240SX top mount t3 turbo manifold ( KA24DE motor ) - T3 Turbo Flange - 35MM or 38MM external wastegate flange - SUS321 stainless steel - Fully TIG welded - Fully Ported and Polished - Includes bolts and gaskets KA24DE(dual cam) T3 or T3T4 or T4 Top or Bottom Mount Cast Turbo Manifold - 91-94, 95-98 Nissan 240sx KA24DE (Dual Cam) - 93-01 Nissan Altima - Extremely Strong Casting - 35MM or 38MM External Wastegate Flange - T3 or T4 Flange - life time warranty Nissan 180SX (CA18DET Only) T25 Bottom Mount Turbo Manifold Nissan S13 S14 KA24DE(Duel Cam Only) T25 Bottom Mount Turbo Manifold Nissan S13 S14 SR20DET T25 Bottom Mount Turbo Manifold Nissan S13 S14 SR20DET Turbo Downpipe Nissan S13 89-94 & S14 95-98 SR20DET Catback Exhaust Nissan S13 89-94 SR20DET Carbon Catback Exhaust Nissan S13 & S14 SR20DET Fuel Rail Nissan S13 SR20DET Engine Damper For RB25 Swap!! RB25 Intake Manifold Three Style Available Cast, Polished , Chromed Cast Polished Chromed RB25 Fuel Rail Fit 10.5 to 11 mm feed injectors PM US or CALL US For Better Pricing!!! Let Us Know You are From Zilvia.net for Best Discount!!!! We are S13/S14 Specialist, if you cant find what you need check out our website GodSpeed Project - Intercooler, Turbo Kits, Turbo Manifold, Body Kit or give us a call if you have any question!! We also have other GB on the forum, so please check them out!!! Ken @ Fatboy Garage Motorsport 11135 Rush St Unit B South El Monte CA 91733 626-442-3988 Last edited by Fatboy Garage; 07-20-2009 at 04:11 PM..

07-30-2009, 12:48 PM	#5
florante rea Zilvia FREAK! Join Date: Jan 2003 Location: king of prussia, pa Age: 44 Posts: 1,448 Trader Rating: (43) Feedback Score: 43 reviews	any warranty on sr topmount manifold? __________________ fdrea

07-30-2009, 07:31 PM	#8
florante rea Zilvia FREAK! Join Date: Jan 2003 Location: king of prussia, pa Age: 44 Posts: 1,448 Trader Rating: (43) Feedback Score: 43 reviews	sorry i was referring to the tubular top mount mani, not the cast. __________________ fdrea

08-04-2009, 10:47 AM	#11
allntrlundrgrnd Nissanaholic! Join Date: Jul 2007 Location: Portland, OR Posts: 2,483 Trader Rating: (17) Rides Gallery: allntrlundrgrnd Feedback Score: 17 reviews	single slammer turbo kit to 21146 __________________ https://www.instagram.com/kook_180sx

08-04-2009, 01:53 PM	#13
allntrlundrgrnd Nissanaholic! Join Date: Jul 2007 Location: Portland, OR Posts: 2,483 Trader Rating: (17) Rides Gallery: allntrlundrgrnd Feedback Score: 17 reviews	who makes the turbo? __________________ https://www.instagram.com/kook_180sx

07-24-2009, 03:10 PM	#2
Grenade180sx Nissanaholic! Join Date: Aug 2007 Location: 909/951 Age: 37 Posts: 2,457 Trader Rating: (1) Feedback Score: 1 reviews	i need a catback exhaust for s13. something similar to the megan type 2. u got anything?

07-24-2009, 03:27 PM	#3
stunnaben Zilvia Addict Join Date: May 2009 Location: Houston, TX Age: 35 Posts: 969 Trader Rating: (4) Feedback Score: 4 reviews	best price on a s14 exhaust shipped to 27603

07-30-2009, 04:20 PM	#6
wisdom01 Zilvia Member Join Date: Apr 2006 Location: Honolulu Posts: 199 Trader Rating: (3) Feedback Score: 3 reviews	how much for the ka24de turbo kit shipped to 96816?

08-01-2009, 12:49 AM	#9
s14tan Zilvia Junkie Join Date: Sep 2007 Location: Dallas.Texas Age: 35 Posts: 582 Trader Rating: (8) Feedback Score: 8 reviews	Pics of the cast mani mounted with turbo to see MBC clearance?

08-04-2009, 12:14 PM	#12
lewisfk Zilvia FREAK! Join Date: May 2009 Location: North Austin, Texas Age: 44 Posts: 1,163 Trader Rating: (13) Feedback Score: 13 reviews	were the hell is your products made? how much research and development goes into your products? godspeed!!!

08-04-2009, 04:17 PM	#14
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	they are made by godspeed

08-04-2009, 04:21 PM	#15
burninskulls0911 Zilvia Addict Join Date: May 2008 Location: Jupiter FL Age: 35 Posts: 827 Trader Rating: (7) Feedback Score: 7 reviews	polished s13 sr intake mani

08-05-2009, 01:10 PM	#16
shmiddy Zilvia FREAK! Join Date: Nov 2007 Location: nyc Age: 39 Posts: 1,279 Trader Rating: (2) Feedback Score: 2 reviews	im looking for a top mount manifold... which do you recomend???? log or tubular?? pm me the price. i need a good STRONG ONE PLEASE LMK ASAP __________________ i fully de-volved

08-06-2009, 01:38 PM	#17
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Check out our site GodSpeed Project - Intercooler, Turbo Kits, Turbo Manifold, Body Kit

08-10-2009, 07:49 PM	#18
kbui Zilvia Junkie Join Date: Jul 2007 Location: albuquerque, new mexico Age: 37 Posts: 342 Trader Rating: (12) Feedback Score: 12 reviews	so what's the zilvia special pricing for the sr cast manifold?

08-22-2009, 10:18 PM	#20
pondmotorz Leaky Injector Join Date: Jan 2003 Location: 818 Posts: 52 Trader Rating: (12) Feedback Score: 12 reviews	Price on SR downpipe and engine damper picked up

08-23-2009, 07:03 PM	#21
d0pe240 Zilvia Junkie Join Date: Jun 2007 Location: lol Posts: 459 Trader Rating: (3) Feedback Score: 3 reviews	how much for the exhaust shipped to 28209?

08-24-2009, 03:11 PM	#22
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	ALL Pm Replied

08-24-2009, 06:18 PM	#23
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Bump Bump Bump we have End of the month special Please PM for pricing

08-25-2009, 06:52 PM	#24
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Bump Bump Bump

08-25-2009, 07:26 PM	#25
d0pe240 Zilvia Junkie Join Date: Jun 2007 Location: lol Posts: 459 Trader Rating: (3) Feedback Score: 3 reviews	does the exhaust hang low to the ground?

08-26-2009, 01:03 PM	#27
pondmotorz Leaky Injector Join Date: Jan 2003 Location: 818 Posts: 52 Trader Rating: (12) Feedback Score: 12 reviews	cat back shipped to 91402 please

08-26-2009, 10:02 PM	#28
Syncade Zilvia FREAK! Join Date: Sep 2007 Location: Pittsburgh Posts: 1,250 Trader Rating: (1) Feedback Score: 1 reviews	RB25 intake mani prices for all three shipped to 16057 please __________________ Jets > Cars

08-31-2009, 10:37 AM	#30
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 39 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Bump Bump All Pm Replied Thanks Ken,S