HOW-TO: S14 digital climate control installation

[Andres_G]

Originally Posted by heyitzalan

i've found your mistake on the pin out dude. defroster vent + and -, u did a mess up on that. jdm pin 5 go to usdm 8, and jdm pin 6 go to usdm 7.

because jdm pin 5 is + def - vent, usdm pin 8 match the jdm pin 5.
and jdm pin 6 is - def +vent, usdm pin 7 match the jdm pin 6.
i read everything accord to jdm fsm and usdm fsm. you don't always match those wires. fsm is the truth. i never follow anyone's write up.

Originally Posted by chuonthis

^Umm...that's what I have in my write up. JDM 5 to USDM 8 and JDM 6 to USDM 7. Maybe you're reading the table wrong? I didn't change anything.

This guy was on the right track.......but didn't quite get there.
Was going over the FSM's and I've found a couple of things that I thought you guys should know about the write up.

Text that is in bold/italics/underlined is the way it should be.

JDM#----JDM color----USMD#----USDM color----Purpose/notes
1---------R/B----------19---------PU---------------OPEN/+CLOSE
2---------R/Y----------18---------LG/W-----------+OPEN/-CLOSE





JDM#----JDM color----USDM#----USDM color----Purpose/notes
5---------G/Y ---------7(seven)---G/OR----------DEF/+VENT
6---------G------------8-----------G/Y-----------+DEF/-VENT





I'll be doing this sometime, so I'll probably be in here asking some noobie questions if I can't figure it out.