NY CA18DET part out new york

[ricers1]

long story short the pistons are shot, im doing an rb swap instead of building up this motor. the motor is still at the machine shop. picking that up next week. so the crank and rods are good doesnt need to be machined, just polished. the block ir perfect, just need a hone. the head will be fully rebuilt....they did the work before i changed my mind. im selling everything for the CA. so name your part.

all new parts only have 5000 miles on them



aftermarket radiatior(i think is koyo or something, ill check later) $200
CA transmission(stock) $100

as far as the block and internals and such, i have to see how much it cost me and ill get back to you. for an idea the head will be about 5-600 or so.
all prices are obo. not including shipping. i will ship at buyers expense.
obviously i didnt list nearly everything i have so just hit me up.

brand new spec stage 1 clutch.... $220 shipped

fuel injectors work perfectly, but need those little caps













stage 4 act clutch(5k miles) $250




got a nice big box of parts.... just ask, also got all the bolts and nuts

intake mani and throtle body in good condition. will seperate



brand new gt28 turbo from egay. not sure if i will sell this but if i get close to what i paid i will.
i spent almost 435 or so........$$180 plus shipping





k and n filter... stock maf sensor $obo might keep the filter



coils and wires and bracket $obo

alternator. since a refurb ive seen costing 160 or so....$75
in good condition

[turboant]

do u have ca18det power steering bracket an pump an how much. email [email protected]

[Slammed180]

Motherfucker^
Exactly what I'm looking for. I just need a Non-hicas powersteering bracket though.

[crono72000]

pm send get back to me asap ...

thanks !

[DALAZ_68]

if that dust shield for a CA how much shipped to 90031

[ricers1]

Originally Posted by DALAZ_68

if that dust shield for a CA how much shipped to 90031

that is sold.. sorry also the ecu trans starter wiring harness and a few more things i cant bring to mind are sold as well

[ricers1]

Originally Posted by turboant

do u have ca18det power steering bracket an pump an how much. email [email protected]

email sent and got a mailer demon back.... email me at [email protected]

[ricers1]

to the top

[boosteds13]

Odd request, but I am looking for the 90* BSPT oil feed fitting on the block for the feed line for the turbo.

[ricers1]

Originally Posted by boosteds13

Odd request, but I am looking for the 90* BSPT oil feed fitting on the block for the feed line for the turbo.

i can try to help figure out what it is lol but can you get a pic or something

[buddha]

im looking for the lower harness, iac and aac.

[ricers1]

Originally Posted by buddha

im looking for the lower harness, iac and aac.

do you have a description for those parts??? i feel dumb but cars been sitting for a while.

finally picked up the motor pics if requested

[crono72000]

PM sent, get back to me asap !

thanks!

[snakes240]

how much is for the outlet for the turbo and will it work on a gar t25

[ricers1]

pm sent. sorry it took so long.

my compputer at home is broken so computerness is limited. for questions about parts or anything email me at [email protected]

[ricers1]

update on parts i do no have. aka sold parts...
ecu
wiring harness
safc2
starter
alternator
ps pump
timing belt and covers
oil filter adapter
thermostat housing
upper mounts (block to rubber mounts) still have nismo mounts
flywheel spacer
timing belt
idler pully
thats all i can remember now....
update parts and prices... PRICES LOWERED!!!!
block(clean and checked out by machine shop) $120
head(fully rebuilt by same shop) $360
crank(balanced) $150
connecting rods(checked out by shop) $60
SPEC stage one clutch (brand new) $275
ACT stage 4 clutch (5k on it) $220
ebay gt28 turbo (brand new) (a/r .50) $300
felpro head gasket (brand new) $15
oem flywheel (needs to be resurfaced) $50
ca18 5spd transmission $75
upper and lower intake mainfolds $80
and again cant remember everything i have so feel free to ask by post or email thanks for all the buyers so far

[crono72000]

do u still have the aac valve lme know asap !

thanks !

[monsta_civic]

How much for the MAF and does it come with the pig tail?? thanks lmk!!!

[ricers1]

Originally Posted by crono72000

do u still have the aac valve lme know asap !

thanks !

i do not sorry

[ricers1]

Originally Posted by monsta_civic

How much for the MAF and does it come with the pig tail?? thanks lmk!!!

youve been pmed, and it is already sold

[somedude]

got a nice big box of parts.... just ask, also got all the bolts and nuts


how much for this box of bolts and nuts? kind of an old bump thought i would ask.

[ricers1]

yes old thread but still plently of parts.

still got the ebat turbo $180!!!!!!!!
spec stage 1 clutch brand new $200!!!!!1
transmission perfect gears. obo
jdm valve covers $40
engine block needs to be cleaned again due to sitting around but cylinders walls are perfect OBO
fully rebuild head $300
upper and lower intake OBO
still got the new felpro head gasket OBO

prices do not included shipping and open to offers

[EP2009]

do u happen to have the bolts to the valve covers? lmk

[ricers1]

Originally Posted by EP2009

do u happen to have the bolts to the valve covers? lmk

sorry i do not have many bolts left if any at all

[cupofnoodles]

still have the intake?

[ricers1]

yes i do. both the upper with the throttle body and the lower with butterfly valves all in working order which one u need

[ricers1]

oooo forgot add. i havent pulled it off yet. but the full exhaust system will be for sale.

its apexi 3 in exhaust i have the down pipe, i believe its a high flow cat,(will know when its out and off) "cat" back inc. muffler, intermediate pipe

[ricers1]

to the top

[racerx2k1]

Originally Posted by ricers1

to the top

Originally Posted by ricers1

pm sent. sorry it took so long.

my compputer at home is broken so computerness is limited. for questions about parts or anything email me at [email protected]

Originally Posted by ricers1

update on parts i do no have. aka sold parts...
ecu
wiring harness
safc2
starter
alternator
ps pump
timing belt and covers
oil filter adapter
thermostat housing
upper mounts (block to rubber mounts) still have nismo mounts
flywheel spacer
timing belt
idler pully
thats all i can remember now....
update parts and prices... PRICES LOWERED!!!!
block(clean and checked out by machine shop) $120
head(fully rebuilt by same shop) $360
crank(balanced) $150
connecting rods(checked out by shop) $60
SPEC stage one clutch (brand new) $275
ACT stage 4 clutch (5k on it) $220
ebay gt28 turbo (brand new) (a/r .50) $300
felpro head gasket (brand new) $15
oem flywheel (needs to be resurfaced) $50
ca18 5spd transmission $75
upper and lower intake mainfolds $80
and again cant remember everything i have so feel free to ask by post or email thanks for all the buyers so far

Originally Posted by ricers1

yes old thread but still plently of parts.

still got the ebat turbo $180!!!!!!!!
spec stage 1 clutch brand new $200!!!!!1
transmission perfect gears. obo
jdm valve covers $40
engine block needs to be cleaned again due to sitting around but cylinders walls are perfect OBO
fully rebuild head $300
upper and lower intake OBO
still got the new felpro head gasket OBO

prices do not included shipping and open to offers

Originally Posted by ricers1

to the top

2 bump limit. You can start new thread in 3 days.