BOV Not Blowing... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Maeda · 09-01-2003, 12:06 AM

This things supposed to be an exact copy of the HKS, valving included...

The line on it DOES go to vacuum right?
I was looking at the D1 guys today and one of the SSQVs I saw was hooked up to the intake plenium?

I also saw no 'one way valves' on any of the BOV setups so I'm getting rid of that starting tomarrow. (My hose fell off on the ride home and I need a new one)

I'll have to try swap with somebody that has a real HKS (same flange) and see if it makes noise, and doesn't stall the car out.

EDIT: I unhooked the BOV and adjusted my idle so it idles at about 850-900, and I haven't stalled out since... but after seeing all the D1 cars I really want my BOV to work!!!

09-01-2003, 12:06 AM	#1
Maeda Nissanaholic! Join Date: Dec 2002 Location: Camp Snake Bite, CA RIP Posts: 2,356 Trader Rating: (0) Rides Gallery: Maeda Feedback Score: 0 reviews	This things supposed to be an exact copy of the HKS, valving included... The line on it DOES go to vacuum right? I was looking at the D1 guys today and one of the SSQVs I saw was hooked up to the intake plenium? I also saw no 'one way valves' on any of the BOV setups so I'm getting rid of that starting tomarrow. (My hose fell off on the ride home and I need a new one) I'll have to try swap with somebody that has a real HKS (same flange) and see if it makes noise, and doesn't stall the car out. EDIT: I unhooked the BOV and adjusted my idle so it idles at about 850-900, and I haven't stalled out since... but after seeing all the D1 cars I really want my BOV to work!!! __________________ Last edited by Maeda; 09-01-2003 at 12:10 AM..