After much work ... done! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FoCaL · 09-01-2003, 10:02 AM

Yes you use S14 bolts and nuts for the shock mount to the spindle. I bought S14 KYB AGX front shocks, so I would not have to drill out the S13 shock so the larger S14 bolts would fit through it. I have an extra set of the S14 bolts. I ordered them from a local dealer, and they said they could not get them in a resonable amount of time. So I got them from another place, next thing I know the dealer is calling me saying they have my bolts in. So I have two sets, one on my car and one to sell.

In the Rear I used Z32 KYB AGX shocks, so they would have the correct lower mount, to bolt to the Z32 spindle I used. If you use the S13 spindle, which works fine also. Then you use normal S13 shocks, but I want the lighter aluminum Z32 ones.

16x7.5 +45
16x8.5 +35

09-01-2003, 10:02 AM	#18
FoCaL Zilvia Member Join Date: Sep 2002 Location: St. Louis Age: 44 Posts: 161 Trader Rating: (0) Feedback Score: 0 reviews	Yes you use S14 bolts and nuts for the shock mount to the spindle. I bought S14 KYB AGX front shocks, so I would not have to drill out the S13 shock so the larger S14 bolts would fit through it. I have an extra set of the S14 bolts. I ordered them from a local dealer, and they said they could not get them in a resonable amount of time. So I got them from another place, next thing I know the dealer is calling me saying they have my bolts in. So I have two sets, one on my car and one to sell. In the Rear I used Z32 KYB AGX shocks, so they would have the correct lower mount, to bolt to the Z32 spindle I used. If you use the S13 spindle, which works fine also. Then you use normal S13 shocks, but I want the lighter aluminum Z32 ones. 16x7.5 +45 16x8.5 +35