Side flanges and J30 axle question?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift80 · 09-14-2003, 09:06 AM

Ok, I have searched many places trying to find out some information about the J30 axle, but to my surprise, i could not find the info I need. If any one of you knowledgeable people here want to help out,that be greatly appriecated, thanks!

Problem: I just got my Nismo 1.5 SSS installed. The kit came with the 5 bolt side flanges(38220-AA016 - 5 bolt ABS flanges) which of course does not fit on the 6 bolt axle of ours(Had to find out the hard way

.) Anyway, I will cut straight to the point, which J30 Axle would I need to fit with those particular flanges?? I know that it has to be pre-95 J30, but I also heard that 92's and 93's are different than 94's Also, I know that the ABS one's are about half an inch shorter then the none abs ones, so which models do I need?? Meaning, which model will work best with my flanges?? I also heard that many people have tap into their old axles to mate with the 5 bolt axle ends. Which model are they talking about to make that happen?? Also, if anyone know any part numbers, that be a great help also, thanks!

Again, I appreicate all of your comments and suggestions. Any information regarding will be greatly appriecated, thanks so much!!

-Billy

__________________

240Driver39 · 09-14-2003, 01:12 PM

U need 93-94 J30 5 bolt flange axles, there should be no difference in the axles length since the abs sensor on a j30 is onn the front of the differential. I used 94 j30 axles when i installed my z32 na vlsd, no problems.

drift freaq · 09-14-2003, 01:57 PM

yes 240driver39 you are right and if drift80 had really done his search he would have found the very same asnwer in our faq section. I know I wrote the faq
NOW PEOPLE USE THE SEARCH!!!!!

240Driver39 · 09-14-2003, 06:42 PM

yeah, drift freaq, its in the faq u did (where i got some of my info back a bit) and in a few posts including a z32 into s13 writeup i did not too long ago too, slackers

09-14-2003, 09:06 AM	#1
drift80 Leaky Injector Join Date: Apr 2003 Location: St. Paul, MN Age: 42 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Side flanges and J30 axle question?? Ok, I have searched many places trying to find out some information about the J30 axle, but to my surprise, i could not find the info I need. If any one of you knowledgeable people here want to help out,that be greatly appriecated, thanks! Problem: I just got my Nismo 1.5 SSS installed. The kit came with the 5 bolt side flanges(38220-AA016 - 5 bolt ABS flanges) which of course does not fit on the 6 bolt axle of ours(Had to find out the hard way .) Anyway, I will cut straight to the point, which J30 Axle would I need to fit with those particular flanges?? I know that it has to be pre-95 J30, but I also heard that 92's and 93's are different than 94's Also, I know that the ABS one's are about half an inch shorter then the none abs ones, so which models do I need?? Meaning, which model will work best with my flanges?? I also heard that many people have tap into their old axles to mate with the 5 bolt axle ends. Which model are they talking about to make that happen?? Also, if anyone know any part numbers, that be a great help also, thanks! Again, I appreicate all of your comments and suggestions. Any information regarding will be greatly appriecated, thanks so much!! -Billy __________________ __________________ Drifting away one day at a time!

09-14-2003, 01:12 PM	#2
240Driver39 Zilvia FREAK! Join Date: May 2002 Location: Charleston, SC Age: 40 Posts: 1,090 Trader Rating: (1) Rides Gallery: 240Driver39 Feedback Score: 1 reviews	U need 93-94 J30 5 bolt flange axles, there should be no difference in the axles length since the abs sensor on a j30 is onn the front of the differential. I used 94 j30 axles when i installed my z32 na vlsd, no problems. __________________ 1990 240sx 5spd fastback

09-14-2003, 01:57 PM	#3
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	yes 240driver39 you are right and if drift80 had really done his search he would have found the very same asnwer in our faq section. I know I wrote the faq NOW PEOPLE USE THE SEARCH!!!!! __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

09-14-2003, 06:42 PM	#4
240Driver39 Zilvia FREAK! Join Date: May 2002 Location: Charleston, SC Age: 40 Posts: 1,090 Trader Rating: (1) Rides Gallery: 240Driver39 Feedback Score: 1 reviews	yeah, drift freaq, its in the faq u did (where i got some of my info back a bit) and in a few posts including a z32 into s13 writeup i did not too long ago too, slackers __________________ 1990 240sx 5spd fastback