ka long alternator bolt

[xsublimefrekx]

im trying to finish up my car and the long alternator bolt has grown legs and walked away. I was hopping to get some work done over the holiday but i need that bolt. I was wondering if anyone knew if the one that is on a SR will work or if anyone has a size and i can look around town for one.

[yukon]

Originally Posted by xsublimefrekx

im trying to finish up my car and the long alternator bolt has grown legs and walked away. I was hopping to get some work done over the holiday but i need that bolt. I was wondering if anyone knew if the one that is on a SR will work or if anyone has a size and i can look around town for one.

wwwwwwwwwwwwwwwwww

[nixad]

Originally Posted by xsublimefrekx

im trying to finish up my car and the long alternator bolt has grown legs and walked away. I was hopping to get some work done over the holiday but i need that bolt. I was wondering if anyone knew if the one that is on a SR will work or if anyone has a size and i can look around town for one.

same thing happened to me,never put one back in.. just use a lil elbow grease when u tighten it up.. been running like that for at least a year now no problems and i run two radios most of the time CB and FM

[xsublimefrekx]

I'm a dumbass it's the one goes into the bracket

[yukon]

piles of trolls

[projectRDM]

I delete those on the cars I work on, just use a pry bar to tension the alternator, then tighten the top bolt to the bracket.

No silly tensioner needed.

[xsublimefrekx]

I need the bolt that holds the alternator to the bottom to the bracket

[yukon]

bye bye beye sfasdfads

[xsublimefrekx]

Yup that's it. Thanks for the help

[yukon]

Originally Posted by xsublimefrekx

Yup that's it. Thanks for the help

i assume you mean the long pivot bolt.

[JEDIs13]

Originally Posted by yukon

ii would buy one at home depot with 14mm head. it might have the wrong pitch but should work ok. approx 2.5 inches long. if it is too long it just sticks out.

dont listen to this fool. that bolt is at least 4 inches long.. just take your alternator into home depot or lowes and find a bolt that can fit into the hole and is long enough to stick out at least 1/2 inch on the other side so you can thread a nut on it.

[yukon]

Originally Posted by JEDIs13

dont listen to this fool. that bolt is at least 4 inches long.. just take your alternator into home depot or lowes and find a bolt that can fit into the hole and is long enough to stick out at least 1/2 inch on the other side so you can thread a nut on it.

retard, i was referring to another bolt. are there seriously people like you in this world.

[projectRDM]

Originally Posted by xsublimefrekx

I need the bolt that holds the alternator to the bottom to the bracket

Then why did you post a picture of the top bolt, the tensioner side?

Nevermind, someone else did.

The bolt you need is M10x1.5x100. Same bolt that secure the A/C compressor the bracket.

[xsublimefrekx]

Thanks for all the help guys. I screwed up before and said something about then tensioner before

[JEDIs13]

Originally Posted by yukon

retard, i was referring to another bolt. are there seriously people like you in this world.

even if you are talking about another bolt you are still a fucking dumb ass. bolts are dont go by the size of the socket you use on them idiot. so telling him its a 14mm doesnt do shit. you know how many different thread size/pitch can be on a 14mm. dont go around giving people "advice" when you dont know what the hell your talking about.

[yukon]

glad it got solved.